Separate names with a comma.
Some features disabled for guests. Register Today.
At 500mm, you will get a VERY safe 12" x 12". Adding an extra 100mm to each cut would get you there, but you're going to have a lot of waste...
I measured out to about 345mm square. That would be the absolute limits. Safe (in my opinion) would be 325mm square.
Just a follow up. I've been having a ton of weird start up issues; missing keys, out of bounds, no settings menu, and similar. I switch my baud...
Oh my bad. I accidentally posted here instead of the CBeam thread, but here would have definitely been a better place. Thank you.
I meant, "the wheels are spinning, but the machine is not moving due to excessive cutting load."
Le sigh. Panel is just giving me one trouble after the next. I "reinstalled" panel and it worked fine the first time, just like before. Every...
As long as everything attached to the same plate is the same, you're fine.
Or if a fore/aft load is too high, won't it just slip?
I'm not Kyo, but the 1/4" should be fine. All they will do is push the plates 0.35mm away from the rails. What matters more are the 9mm spacers...
I hate to have to come back and bother you guys over here in the main thread, but there is something that isn't adding up. The LEDs on my DQ542MA...
That is true. Always stay positive!
After busting my brains on this thing, I've come to the conclusion that my X axis driver is the problem itself. The other three drivers are...
digital issues... I used to get an error on startup, but now everything seems to be starting normally. My settings are completed unavailable now...
Thanks, that will come in handy later. This is exactly what I got. But the search terms "aviation plug 4 pin" will give you what you need. I...
The cable chain supports are completed which means that I can now start snipping x and z stepper wires. I'm still fighting with the computer...
Everything has power now. Technically, the machine should be able to run, provided everything is hooked up correctly. The steppers will only...
I'm using 16mm aviation plugs. You can get them in a few different mounting diameters. I believe the 16mm ranges from 2 to 12 pins. I'll get...
Will do. I'm still in the "hoping everything is correct" phase.
Thank you! Just a Bosch Colt 1hp for now, but would like a 1.5kW as soon as the first few parts get made.
I'll hopefully be finished with the rest of the wiring today.
