Separate names with a comma.
Some features disabled for guests. Register Today.
Think I am done with adding all the features I wanted to this thread program. A week or so after initially creating the GitHub repository for this...
If you are looking for a plotter with repeatable accuracy, this is not it. I was never able to get the accuracy I wanted with this machine but...
Since using Fusion 360, screw thread limitations have always bugged me. I was used to how flexible you could change all the variables of a...
I had to do some tuning to my printer this week as my prints were not coming out as well as I liked. I tightened the belts, eccentric nuts,...
This is a little sloppy fit which I kind of expected, but more so than I thought. I added some more support for that inner gripper as that bent a...
Since Fusion 360 displays the Pitch diameter as you change the module size, I used a spreadsheet to work backwards from the Pitch Diameter needed...
I decided to revisit this 3-jaw chuck design for a vertical pen mount. I couldn’t figure out the spiral path a couple of years ago, but after...
I decided to add a drag chain to this rolling plotter. I spent more time than I care to admit getting this the way I wanted. My 1st big mistake...
That looks like a nice simple design that would be a lot easier to build. You should not have any accuracy problems with that once you have it...
I read your message a little closer & see that A0 size paper is 1189mm x 841mm (46.811" x 33.11"). That is a pretty big sheet size. Biggest...
I looked at doing it that way, but after playing with that idea a while, decided to use a similar setup as I was with the servo motor. It will...
The BlackBox does seem like a really nice controller. I think it would be overkill for me in this situation though.
Thanks for the info. It is good to have that info in this thread. I had not looked at using OpenBuildsCAM for this, mostly because I wanted it...
My experience with servos for use with this pen plotter has been that great. I probably didn't do enough research into the use of servos with pen...
Good idea. I will see if I can get the info together in the near future to add separate build for this. I did redo the pen gantry to use a...
I would agree with the other David on this. If you do not have many drawings, it would be less expensive to just have a print shop print them for...
Interesting. I had not seen weights made from Tungsten. Thanks for the reference.
I didn't see a PDF either. I downloaded those pages using HTTrack Website copier a while back. Probably better ways to do that now, since that...
If you look on the Build tab, you will see links to probably everything you need to build this. Here is the link for the build guide from that...
Here is Part 3 which is probably the final part of this assembly build. [MEDIA]
