Separate names with a comma.
Some features disabled for guests. Register Today.
I had a bit more troubleshooting to do with this turntable setup. Even though the rotary test worked, I could not get it to work with the Z-axis...
Thanks for the links. I will see if I can make it work for me.
Here is a short video of the testing of this table. I might need a better way to center object on the turntable. I am going to reprint this table...
The connector on my stepper comes out the side & not the bottom, so I do not have any clearance problems as this picture shows. [ATTACH]
I went about as minimal as possible using 608-2RS bearings. I was able to make it a lot shorter by mounting the motor below base, so everything...
I got the diameter down to 110mm & have a wrap around bracket for motor to use 2 motor holes. I added some 2mm holes spaced 1/2" apart so I could...
I used the 2nd link in my previous message as a guide, but am using a pancake nema17. The bolt & bearing setup is similar to that used on the...
Here is a design that might be a good starting point. Printed Arduino Turntable Takes Objects For A Spin | Hackaday Or this one. Photo or Video...
It finally dawned on me what you were getting at here. For some reason, I was thinking you were talking about rotating the engraver & not the...
This does sound like a good idea. I would want to test them with a similar weight item before putting the engraver on there. How about two of...
While running these vertical burns, don't know if it is my imagination, but it seems that smoke gets out of the way easier than when burning...
I don’t have laser glasses for the cat so can’t run the laser with her around. Her name is Smokey. I did a burn of the leg for my CNC table & ran...
I did another dry run after setting the $1=255 and seems to have no play in the vertical now. I will do a burn test today & run it twice to see...
I uploaded my grbl settings to the Files tab. I went thru my X & Y limits and have a little more width on the X than I originally thought. My...
I will do that tomorrow. There is nothing special about them.
That pretty much fixed the problem. Will do a real burn test with it tomorrow & maybe repeat the pattern to see if it overlays it.
I would say the first test looks like hardly anything to change. It does have some settling creep, but that should be easily fixed by making a...
I was able to cut my 1 meter 2060 and keep the debris minimized in my shed. I replaced the 2060x250mm feet with 2060x500mm feet. I replaced the...
