Separate names with a comma.
Some features disabled for guests. Register Today.
The computer is used to design your part, then to generate the CAM file (gcode). Depending on what CAD program was used to design the part, you...
Are you sure you want to shim it with plastic? There are many 65 mm spindle mounts available online. I bought one for less than $30 for my Makita.
Apparently the build has been either removed from OB forums by the author, or he just provided a link to his webpage in another thread. Here it is...
Vcarve should allow you to carve what you want with a rotary axis. There was a build posted here last fall called the Rotary Demon. It was a fully...
Mary, if you have TAP Plastics, they sell in 12 by 12 increments. I have found 10 by 14 pieces in their scap bins and it is sold by the pound. Not...
If you are doing long carves and you ordered drv8825 drivers (or any other "3d printer " drivers) for your shield, you will need a very good...
I see lots of questions here. Although no apparent info on the rotary axis, I noticed on his machine the website Welcome to Franken 40 Build...
Oops! I should have mentioned that when I suggested the bit. Sorry. :) I first discovered this problem with cheap Chinese endmills and things...
Another thing to check with the micrometer is your endmill diameter. I have yet to find one that is exactly what the manufacturer states. For...
Great build! Those projects look great too.
That was a well done video. Great idea.
I use the drop in t nuts. Drop In Tee Nuts
Recently I cut a round disk out of 3/4 inch particle board, but I forgot to make my holding tabs only 3 mm high. So, I did a quick CAM file to...
Sorry I missed this. I have been on vacation in areas with limited cell phone reception and no wifi. I highly recommend it.:) I have been using...
McMaster-carr. McMaster-Carr
For hard woods, I like to use a two straight flute endmill to prevent tear out. I have had good luck in oak cutting depth of 1/2 the diameter at...
Also, if they are on the outside, it is more likely your blade is square to the edge of the track.
Reversing one pair for the Y should do it.
If it is a belt machine, you want them to spin opposite. If lead screw, then just reverse one wire pair on one of the Y motors.
I use those same lead screws. One rotation is theoretically 12.7 mm.
