Separate names with a comma.
Some features disabled for guests. Register Today.
I have both big tires printed now & should be able to test it tomorrow. The 9mm shortened length seems to be a good length. The o-rings still...
I tried some #84 (3.5"x5/8") rubber bands yesterday wrapped around the o-rings on both wheels, but they came off a minute or 2 into the plot....
I got the new wheels installed as well as stiffer endplates. The carriage belt has a better tension on it than before. I ran it faster today at...
I am finally getting back to this design. Over on the V1engineering forum, dkj4linux pointed out my wheel binding problem and also the fact that...
I finally changed this machine so none of the V-slot overlaps or extends out. Zyltech started selling different lengths of 2020 & 2040 of what...
I thought this design came out quite well. The shims I used as a feeler gauge to set the height of the bottom of the print cooler above the bed....
I had a problem with the thingiverse page for the print cooler & could not resolve it, so I deleted it & uploaded it again under this: Titan Air...
I can't think of anything else to change, so will see if that stays true for the next few days. 8mm was the perfect amount to move it in as...
After tightening up the bottom part of the design as much as I could, this morning I realized I had not even considered moving in the top part....
I had another idea yesterday to lay the 2 outer pipes on top of each other thus shrinking that part of the diameter at that part of the design. I...
I really liked that manifold idea, but it was a little bigger so I had to revisit that design & think I fixed my problems. I changed the manifold...
I updated the files on thingiverse & added the fusion 360 files to both the horseshoe & manifold design. I added 2mm more adjustment height for...
Air flow feels pretty good & water test looks good to me. I made a test bracket plate to hold the manifold cooler on top of the bowl of water. I...
I lowered the manifold because the airflow looked too cramped. Simulation looks really good to me, so I am going to print & test it. [ATTACH]...
The Fusion 360 file might be too cluttered to upload, but will upload a STEP file. I am pretty happy with it so far, but had a bright idea this...
I tweaked this print cooler design a little more. The simulation was showing 2 outlets between the 2 intake tubes were not getting as much air...
Here is a rack & pinion design that I saw dkj4linux using on a foam cutter. Since the herringbone rack needs to be printing in sections, it would...
After a friend suggested using a tubular grid to create a laminar flow, I decided to try 12 small 2.5x3.5mm elliptical holes for the outlets...
I wasn't looking specifically for fusion 360 models, just models to get ideas from. Although fusion 360 or step models would have made it easier....
I thought S3D was the slicing program Simple 3D? That does not do design does it. I used to use Draftsight Pro (2D) & openscad (3D & final...
