Separate names with a comma.
Some features disabled for guests. Register Today.
Is there a chance the wires are reversed on one axis?
I also am a big fan of Estlcam. I use Gary for tech support.:) I love the probing function and the use of the Xbox controller to jog it around....
There would be more flex in the X axis which can affect accuracy in cutting some materials. But, if it is for cutting wood, it may not be to much...
Did you install the Arduino IDE? I have windows 7 on the old laptop and I needed to do that to get the arduino drivers. I was using a newer...
You are correct. In my mind I was imagining myself doing it by hand like when I used an edge guide to cut slots for shelves prior to having a...
Did you by chance select to leave stock for a finishing pass? If not, cut a single cutter width slot in a piece of scrap and measure it. How...
If you want a great deal on aluminum T-track, look here. It is $5.25 per 24 inch piece. I went with the $8.54 per 4 foot piece. I put a 4 foot...
I made a smaller version and removed a bit of detail that was unnecessary and causing the dough to stick in the cutter sometimes. I noticed a...
This is my contribution to the holiday season. If the show South Park offends you, I apologize and recommend you proceed no farther. For further...
If you do it how I did it, it is scaled properly. If you just open it as an svg in Fusion then you have to mess with figuring out the scale. If...
Also, check out the lower part of this post by Kyo. It has the diagrams for connection the arduino to the driver. C-Beam cnc
There are only three axis (X,Y,Z). An Arduino will work for controlling the Workbee. If you want limit switches on all three axis (six switches),...
You can run those same DQ542MA drivers using a $20 arduino board. I suggest a real one not a clone. For the price of the entire build, $12 more...
Open the file in Tinkercad then export as SVG. Open the SVG in inkscape, then export it as a DXF. Only takes about a minute or two per per part....
Are your anti-backlash nuts still tight -- ie. the screw that removes the backlash? I noticed after about 2 years, I had a little play in one of...
Have you read through this? C-Beam cnc
Gary, I can't wait to see that tutorial!
I just use a genuine Arduino board. You can buy a cloned version from China, but for a few dollars more, I knew I would not have issues. I use an...
I can't speak for usina Rpi or Acorn. I used GRBL panel and liked it, but in the last few months, I switched to Estlcam and love it. I do not...
MG, from this web page they are TB67S109 step sticks (4Amp). Here is Toshiba's info on the chip: TB67S109AFTG | Motor Drivers | Toshiba...
