Separate names with a comma.
Some features disabled for guests. Register Today.
For holding just the drag chain it is quite strong enough. I could not twist the 2 aluminum extrusions apart after putting those parts on. Not...
Don't use the dimensions on this drawing. The 50.4mm should be 50.8mm (2"). Just spotted that today (2/28/2019). Here is what my waste board...
Thanks. Guess I enjoy this part of the build more than actually using the machine. I do plan to cut something on it tomorrow, hopefully the...
I soon realized that I would have to take the X-axis C-Beam off in order to install those plastic joiners between the 2020 & C-Beam. If I had to...
I almost regretted taking that X assembly apart from the C-Beam. I thought it might be a bit of problem putting it back on with the wheels & it...
This connection feels pretty tight with just 3-6mm joiners & does not twist at all when I pull on it. I did just realize that I will loose...
While working on changing these channels, it occurred to me I could make side plate covers that cover the 3 channels as one part (The bottom...
I went to put all my channel covers on today & was surprised they were loose going into the C-Beam versus the V-Slot. I certainly did not expect...
I wanted to add some more V-slot channel covers to my Sphinx. After looking at maybe buying a few more of the covers, I took a look on...
Before I look into surfacing the MDF board, thought I would see how close it is 1st. I used a scrap piece of 3/4" MDF as a feeler gauge to get...
I did some fine tuning & testing on this machine today. After running the test pattern yesterday, I noticed a couple of the wheels on the Y-axis...
I am making a lot of progress learning Fusion 360 now. I started watching some of the beginner videos that Lars Christensen does & they are very...
I am considering offering a bundle of the 3d printed parts for this build for those that do not have a 3d printer or that would prefer not to...
I wire tied the wiring yesterday & might redesign those 2 Y-motor connect covers to have a way to wire tie to the back bottom aluminum spacers. I...
Think I got all the wiring redone today. I had to re-strip & tin a couple of wires that did not look good on my 1st try. That is another good...
Now that it is warm enough in my shed this week, I cut one motor wires back & tinned the ends late yesterday. I expect to get the rest of the...
I updated the zip file of all my parts to Sphinx55_3d_Addons_V2.zip. I added CBeam3mmSpacerKeeper_Rev40.stl & scad file that I had forgot to add...
I have been looking at buying an openbuilds machine to cut aluminum for awhile and waited for the Black Friday sale before purchasing. I went...
I added the file Sphinx55_3D_Addons.zip to the Files and Drawing tab that should be all the plastic parts that I used on this build. If I add any...
I needed my 250mm length of 2040 for another project, so I decided to change the corners that attach the electronics case to the back v-slot to a...
