Separate names with a comma.
Some features disabled for guests. Register Today.
I got the tee nuts moved to the proper spots. Taking the Y plate off was a little more trouble than I 1st thought. I also had to take the X-Axis...
I realized this morning after taking a look at the drag chain wiring video again that I have the X limit switch & 2020 drag chain tee nuts...
I was looking at the Z limit switch location yesterday & discovered the top plate & the carriage both have some M5 threaded holes in them at good...
I needed a way to mount the Meanwell 24v PS to my Sphinx 55 build & this is what I came up with. It is quite customizable with variables in...
David Bunch submitted a new resource: Meanwell 24V PS Brackets Mount to V-Slot - These customizable brackets mount the PS or Powercase to V-slot...
While building my Sphinx 55, I was looking at the motor connections & realized I could make covers for these. They clip into place covering the...
David Bunch submitted a new resource: Openbuilds End Motor Mount Cover - Plastic part to cover for with 49mm Extended Motor Connection While...
I added the front Y cover plate STL files to the Files and Drawings area of this build. Depending on which STL file you use, you will need to...
Thanks for the tip. I will try that next time. Looks like I did not damage the bearings after all. I changed that with a new wheel & bearing...
That is what I was thinking on the 2060's, but wanted to see what other suggestions there might be before taking that apart. At this point, it is...
I figured out how the Anti-Backlash Nutblock works after looking at the parts store photo. I ran into a small 1mm problem when attaching the...
In the Sphinx 55 build video for the Anti-Backlash nut block on the Left Y Plate (29:58) does not show that setscrew with nut like it does for the...
Thank you. They took care of the problem.
While cleaning the C-Beams for this build today, I noticed these defects in one of the 500mm C-Beams. I am guessing this is part of the anodizing...
I like your design & downloaded a sketchup version of your file to take a look at.
David Bunch published a new build: This is a build log of the Openbuilds Sphinx 55 with some 3D printed parts for the electronics and probably...
I did a little more rework on this after I realized that I could get rid of my overhangs by adding the standoff to the bottom case and adding nut...
I initially wrote about making a 3d printed cover to keep the debris out of this case in this thread, OpenBuilds Sphinx 1050 , but thought this...
Using Draftsight Pro (AutoCAD clone), I have a lisp program to generate polylines from arcs (I usually have segments of an arc around .7mm...
I was thinking about your problem this morning & came up with the idea to glue these nuttraps into the bottom vertex parts where the nuts that...
