Separate names with a comma.
Some features disabled for guests. Register Today.
I see what you mean. Glue or Loctite might be your best option then. I have never used Loctite though. If you redesign it with nut traps, I...
I usually use Locknuts instead of regular nuts. Lockwashers should work with the regular nuts instead of just using locknuts. I can see where you...
After asking that question, I remembered that plate you had put in the bottom & figured that was the extra weight. I have some MDF board, so have...
Cool, thanks for the info. I like that weight a lot better than the 70lbs I was thinking it might be.
How much does the Sphinx 55 weigh? I see on page 4 of Kyo's C-Beam Sphinx that his weighs about 70lbs. Is that about the weight of this machine?...
I was using either #8 or M4's in the openscad, but looks like STL files were generated for #8's & since they fit for you, that is what I would use.
If you are referring to the dovetail connections which sounds like you are, the default tolerance is .3mm. In the openscad file you can change...
You are coming right along. There is a Klipper facebook group called "Klipper 3d Printer Controller Firmware" that should be helpful to you if...
Thanks for the info. I will order some extra regular tee nuts when I decide to buy this. I watched the build video for this & wiring build also....
I was comparing this Sphinx 1050 with the smaller Sphinx 55 to see which parts were different & noticed the sketchup file for these 2 sphinx...
Yes, but as you said I would need to do that for every page just as I would for printing to PDF as I mentioned. This thread would not be too bad...
Thanks for all the info. Looks like the bellows that Rick gave a link to seems the best option. I will ponder it and look at the build guides...
I have been looking at building either this mini mill, the C-beam or sphinx to cut aluminum. I currently do not have any projects that need to cut...
Your delta is looking good. Yes, Klipper supports delta kinematics. On a Delta machine is where it really shines as you can use 8bit controllers...
Instead of using PETG, you might want to look at esun PLA+. It has a lttle bit of flex, but not as much as PETG. I have not printed with...
Here is an image showing the SeeMeCNC 300mm hole diameter heatbed & I get 16.58" for the side lengths when I drew it graphically in Draftsight....
Its looking good. You might want to test fit a slider carriage on one of the columns to see if you have any separation of the pipes where the...
You made a lot of progress quickly. Those are pretty long prints as I recall. You should be able to just use the brackets from:...
This image is what I had in mind. Add 3 screws to tighten the brackets to the pipes & try to compress the pipes together. That should give you a...
I never actually built a final end product of this design as it did not seem that cost savings to me, but if you are only going as large as 300mm...
