Separate names with a comma.
Some features disabled for guests. Register Today.
What software are you using and what are its settings? What are your GRBL $ settings you enterred into the software? Have you ever calibrated...
Did you program the board with Estlcam? If so, there is the option to reverse it. I use an arduino with independent drivers and have had no issues...
Cool. Looks like a steelhead jig. My cnc is my own design similar to the Ox but I used large leadscrews rather than belts. It works great on...
That is what they roughly "should" be. If you havent already, now you need to figure out what they actually are. Now the fun math comes. I used...
Can't say I have ever had an issue with GRBL. Thanks for everything you do Sonny. You have made my life more fun with this cool open source stuff.
Are all your steps/mm the same? They should be close since they are all the same type of screw. If it is not calibrated to be dead on, you may...
I plan to make jig heads with mine too, but I just haven't got around to it yet. I have made several mounting plates for rod holders out of...
I think your best bet is to set the board jumpers to 1/8, and enter in the steps/mm I listed above. The xpro should have documentation on how to...
That is weird. It should be a multiple of two I believe. What microstepping is your board set at. I believe there are jumpers on it which will...
Did the settings get erased when you installed the new GRBL on the board? What would be helpful is if you listed what it is that drives your...
I thought I asked before, but did you calibrate your steps per mm? [MEDIA] If you type in G0 x100, does your x axis move 100 mm to the right? If...
Is there chance your gcode sender (Grbl panel) is set for inches rather than metric, but the file is in mm?
Good find. I don't remember them having the metric sizes when I bought mine. I may grab the 8mm.
The other thought I had was maybe UGS did not take the settings you chose for your steppers.
I am no expert, but I always see people with issues, or warnings issued about UGS. I have never tried it, but I have tried GRBL panel. It worked...
The Elaire collets are nice. I bought the set of three. 1/8, 3/14, and 1/4. Your 3 mm should be able to make every size hole, or slot, you...
This is great info since I use Estlcam and have the Makita. Thank you!
It could be that the x stepper is reversed.
I will add it to the GRBL Panel page if no one objects.
Have you calibrated the steps per mm? Search CNC calibration. It sounds like your settings are wrong. Have you read the gnea/grbl ? It will tell...
