Separate names with a comma.
Some features disabled for guests. Register Today.
I wish I wouldn't have seen this again. Now I am tempted (https://www.amanatool.com/pub/media/custom/upload/File-1466515075.pdf). Combine that...
What I did on all bearing collars was carefully take the bit used for my m3 tap (Drillpro T Handle Ratchet Tap Wrench with M3-M6 Taps and Drills)...
Yes. You could use those. Watch the video here The Frog: CNC Router if you want ideas how to do it. You should be able to get all the matching...
There are also these anti backlash nuts and couplers. dumpsterCNC - acme components No need to turn down the rods. I did not see these when I...
Yes, you are correct. 1000 mm rods would not be long enough. I did not catch the 1000 x 1000 mm cut area. I would go with the 1/2" - 10 five...
You could also attempt to bore out the flexible couplers with a drill press. I tried that once...only once. It was painful and I have one less...
Use 8 mm rods and 8 mm anti-backlash nuts sold here on Open Builds. They are already the right diameter and will work for the 1000mms you need...
What I did on all collars was carefully take the bit used for my m3 tap and drilling into the rod through the hole the set screw would go into....
I had considered the double belt for mine due to the 1500 mm length. When I added all the belting up, I found that 1/2"-10 five start screws in 6...
Thanks for the kind words. I will try to answer your questions: I do not know what parts were used in the Ox-Metal by Schematix. I already had...
Thanks.
I have four of them. Two for the Y axis.
I use 269 oz Nema 23s. Two on the 1500 mm Y axis (one one each side of the gantry) driving the same 1/2"-10 5 start screws and one on the X axis...
Are you running other programs at the same time? I will get crashes and that message sometimes when I have GRBL Panel open along with other programs.
I want to give this program a try. Currently I use GRBL Panel and I like that I can use lots of different CAD programs to generate G-code (Fusion...
If you join Instructables, they offer free classes in using Fusion 360 3D Design Class. They also have 3D printing classes that start with...
I cut and drilled all my plates with a scroll saw, drill press, chop saw, and a table saw. Here is how: Lead Screw Driven Ox Derivative (850x1500)
What size are the smallest holes you need cut? Where are you located? It is hard to provide information on where to purchase (other than from...
The parts list is available in the parts list tab above. However, I noticed the link to the Onshape drawing is different than the finished...
I didn't either. I studied up here at Openbuilds University. I read through the builds of the designs which were similar to what I wanted and read...
