Separate names with a comma.
Some features disabled for guests. Register Today.
I can see it for £24 on eBay, but that is for 33m :banghead:
@tommy arno They are not need for machine operation, you can manually jog your machine to the start position and run your job. They do come in...
@tommy arno Basically do what jonathon said, couldn't explain it better my self
@olecam Yup sounds like a suitable plan to me :thumbsup:
@olecam If your machine is always constantly 0.6mm below the size, then you could adjust your steps/mm. So in your case you need to set it 26.83....
Hi, You can use limit switch kits like these: Limit Switch Mounting Kit But you would lose some Z-Travel. What you can do is glue them on back...
Hi, Yes i think we are going to change where we put it :thumbsup: Ryan
Hi, It would probably be easier to setup the zero at the top front left corner. Then you can just lower the Z down on to the piece, click reset...
Great news!
Not sure why our PDF is different, as it came from Openbuilds, but our rails are from Openbuilds, so they are the same. Ryan
Hi, We use a grid of holes spread across the board at about 65mm spacing. Then on the underside inset wood tee nuts. Then we use the Openbuilds 5...
I think it could be because $100 = 0.00, it needs to equal 26.667
Hi, Have you tried setting $4 = 1? Ryan
Glad you got it sorted. Regarding the chatter, is it at the beginning of the straight cuts? or just the whole way along? For MDF i run it as 2mm...
Also take a look at getting a calculator like gwizard, coming in handy when working out what speeds to run at.
Hi, The parts list would be the same. It would be just the extrusion lengths which would need changing. The spreadsheet is for a 500x750mm...
The plates supplied in the kit we don't cut ourselves it would be way to much work. Everything we prototype we cut ourselves. I use a 1/8" solid...
Hi, On our shop OX, we pretty much use it to exclusively mill aluminium. Without cutting lubricant we cut at 0.25mm pass depth @ 600mm/min. We...
Hi, Apologies for the price of shoe, i wish we could offer it for cheaper. If you have access to a 3D Printer, then there is a few designs...
Hi Andrew, Ok, is the board getting recognized windows? Do you want to try one more thing, re-flashing GRBL 1.1 to the board: 3. Updating GRBL...
