Separate names with a comma.
Some features disabled for guests. Register Today.
Hi, 3-5days it should be. Ryan
Hi, I put this in another thread, but will also post it here. I have attached a BOM for a C-Beam XL With a 500mm X-Axis, and only one actuator. I...
Hi, I have attached the BOM for a C-Beam XL Small. I believe it to be correct, but i couldn't say 100% until i built one. We do get them in...
I will work out the BOM, and come up with a price and send it over. I may offer it, only issue Openbuilds don't offer a small C-Beam bundle with...
@Ryan Turner Sounds like a plan to me! About 1/8th turn from full i have them
Hi, Do you need to mill the full 600mm length? If so you will need the XL to fit this on. If you don't you could do this on the small C-Beam, and...
Hi, i think this is because you have download the UGS Platform, there should be a second link which is UGS Classic GUI. Its a hard thing to say,...
How does the machine operate directly when using a USB Cable? I used to use Chilipeppr and a pi, but found it a little bit temperamental, like...
@Ryan Turner You can get them here: CNC Dust Shoe Boot – Removable Brushes We admit they are pricey, but well worth it, they come from kentcnc...
Hi, I have sent you an email, our manual was written using a mac, so it shows up slightly different. On a windows it would be a COM port. Ryan
Great News!! Thanks for posting the solution :)
Sorry pictures didn't show above i just copied an pasted it. PM your email, and i can send them across. @Marcus1 I can't understand why it is...
Yes it is possible: Z-probe on the V2 really isnt too bad - all you need is a conductive plate (of known thickness) and some alligator clips and...
@Matt-Sparks Thanks for the great write up and pictures, we love seeing them! I think i have given all our packers OCD, they are the ones now...
Hi, Glad you got it sorted. Sorry for it not working first time, we will look into our crimping methods on this part :) Ryan
Hi, I have sent you an email, but for anyone else who may read this, i would advise to have a working volt meter, or some way to test the voltage...
Hi, This is only if you have an ATX PSU, are you using one of them? If so @Michael should be able to help you out. Ryan
Yes you can control a spindle with the xPro see here: CNC xPRO Driver I think you will need a relay as already mentioned.
@Marcus1 Great, thanks for letting us know, should help anyone out in the future. Also thanks for the info on the vacuum table :thumbsup:
The motors on the kit are NEMA23 1.8° +-5%. But the error is non accumulative on stepper motors. A full 1.8° step on these motors with GT3 Belts...
