Separate names with a comma.
Some features disabled for guests. Register Today.
0.2-0.25mm would be easily achievable on this machine.
Yes, should be able to, the important thing is to make sure it is well calibrated and tram.
Solid Carbide you can't go wrong with really. Is it a V cutter you are after?
Fusion360 is a very good free option. For a paid option we recommend looking at the programs by Vectric, they are pricey, but you get a lot of...
Thanks for ordering from us! For the software, you need a CAM program, however i believe there is CAM plugins for inkscape which would accomplish...
Hi Matt, Hopefully we will start shipping them friday, for bits, in the uk, try routercutter.co.uk, or cutwel.co.uk Ryan
Could it maybe be too much for the machine? Have you tried dropping it down to 0.5mm? Hmm seems you have tried most things. Could it be an...
Did loosening the wheels work for you?
Could be an overheating issue, so it cuts out, but once it cools downs, the commands are to go in the other direction?
It is 22AWG solid cable, i reckon ebay would be the best source to find lengths of it.
Ok, that is what i was going to suggest trying fast decay. I was thinking maybe wheels being too tight could be cause? @Chillimonster Pretty much...
@Muxa How did reinforcing the joint work out? Are you using the xPro controller?
Hi Steve, Yup that is the way :duh: Best Regards Ryan Lock
@less76 For power we use 1.5mm2 to the controller. On the motors, our motors come with 22AWG Cable. Signal cable, 22AWG wire would be ok for the...
Hi, They should move with mild friction. I wouldn't have any loose ones. If you do the top and bottom set first, then do the middle ones, i think...
Hi, do you mean you can't get it to move? Or set the settings? If the former, try $4 = 1
Yes, the the drivers have different decay settings.
Me and @Rhys Gerrard Were diagnosing his issue directly over email. And i think we have solved it. So for reference to anyone else who many get a...
Ok, if you are always running your machine really slow, then i would advise putting it into fast decay mode using the solder jumpers on the back
@Matt-Sparks Thanks for the order! I always say building the machine is the easiest part, learning how to use it and the CAM Software effectively...
