Separate names with a comma.
Some features disabled for guests. Register Today.
Hi, 1. Also check your pulley grub screws are tight. Is your xPro in fast decay mode, this helps. 2. What type of mill are you using? 3. Maybe...
For customers that ask we have been doing the full kit portion which we supply with our OX Machine for the C-Beam machines. Apart from the drag...
I think you may need higher ampage drivers, a4988's have 2A Max current, may not be enough with the motors supplied with our kit.
For your vacuum which you attach to the dust shoes, is that hose secured somewhere to offer strain relief, because if not i am thinking this could...
@Alan Foster As Darathy said. But that looks like quite a big difference to be caused by incorrect steps/mm if they are set to the manual values....
Vectrics products are very good, so simple to use. Hmm not sure, maybe tighten the wheels up a little bit on the Z-Axis?
@Alan Foster Thanks for the update. Super cool to see one in a production setting, glad it is working out well for you. We are super busy shipping...
@michael nilsson Thanks for the honest words, always helpful to know where we can improve things. I think in a future design a bolt system to...
We don't offer the upgrade, but there is no reason why you couldn't attach a laser to it, you will just need to find suitable controller/software...
Hi, Thank you for contacting us. We don't offer the upgrade, but there is no reason why you couldn't attach a laser to it, you will just need to...
@pjunger You need to select a post processor which doesn't use arcs as this isn't supported in GRBL. I am not sure why the best one is in...
Hi, Yes with out mechanical kit you can pair it with what ever electronics you like. Ryan
@Metalguru answered both for me :) I left a comment on your video @shai kaplan about fast decay mode.
Sounds like your getting there. I haven't got much experience with Mach3, but maybe try reducing the Backlash speed.
0.3-0.4mm does seem on the high side. See if you can get the belts tighter. Maybe try setting the steps/mm to what they should from calculation so...
@Jen Looks great in all black. Lovely neat wiring :thumbsup:. Hopefully it exceeds your expectations.
@Conehead Looks like you getting there. It is a learning experience buying the endmills, but once you have settled on a few you like you will be...
Ok, maybe try the final cut incremental steps.
As rick said we do mechanical kits and full kits.
@Manuel Beer Our OX Kit by default comes with aluminium plates all round.
