Separate names with a comma.
Some features disabled for guests. Register Today.
@Muxa Greats looks like we are getting there. With the final cut did you do it a full depth, or still in incremental steps? I think have the belts...
Hi, Good to hear you are interested in the OX. I just want to make sure you are aware that the ones on ***** are nothing to do with Us or...
Ok great :thumbsup:
They are SM-4 2.54mm Connectors. Do you have our full kit? They shouldn't be too short for that setup, we supply them at 2.5m.
@Conehead Great glad you got everything sorted. Thanks for the suggestion on the mount, is something i want to do, but 3D Printers are full loaded...
@Conehead Strange noise, i am wondering if it is the same as @Muxa above. Does it feel like it is come from insure the motor, or mechanically?...
@Muxa I am not sure to be honest. Maybe there is some debris stuck in the block from the manufacturing process. I can only think of taking it off...
@Conehead Have you changed the GRBL setting, step idle delay? this governs when motors idle, you want it set to 255 for a belt machine. @Robert...
@Paul Franklin About 1000mm/min, at 1mm per depth should be a good starting point. @Alan Foster Ok, in the GRLB Settings, there is max speed...
@Alan Foster Glad it is working! Regarding the spindle, have you looked at the file to see the command V-Carve is using for spindle control. If...
@walckhome Welcome to Openbuilds! Glad you like the kit :) The board is by default set to slow decay, even though it is says slow on the back, a...
@Conehead I would definitely advise attaching heatsinks to the drivers, and getting a cooling fan over the board. The DRV's do make a high pitched...
Are you still using A4988's? Because they are a bit under powered for them motors. With the belts the tighter the better i usually find. Maybe...
@Inaudable The noise can solved by putting the xPro into fast decay. On the back of the xPro there is a serial sticker, underneath this, there is...
@tparsons Yes, you can have the sheets stick out each end. We don't stock extrusions longer than 1500mm, and this machine isn't suited for going...
Shielded would be better for the endstops, but you CAT wire would be fine. For the emergency button, i think it is best to just have it in-between...
Thanks for the vid. Yes definitely look at adjusting the drivers. Could be overheating, hence it cutting out.
Could we get something more info on your controller? As long as when the carriage moves, all the wheels rotate consistently you are good to go....
@Alan Foster Good to hear it was was something simple :) If you go to page 7 of this thread, you will see what other customers have done. So you...
@Muxa As Alan said there is solder jumpers on the back, if you peel off the serial sticker. You will get a high pitch noise with the drivers once...
