Separate names with a comma.
Some features disabled for guests. Register Today.
If you’re getting 8.6mm it sounds like your bearings are not properly seated. This is one of those items that is very consistent. A wheel with (2)...
4x4s and 2x8s would probably be your best bet.
Yes. And if in doubt this is fairly easy to check with digital calipers. Set the wheels in place and measure between the inside edges of the...
It is and this can be found in a number of threads over the years, most of them 8-10 years ago. There were a lot of problems with manufacturing...
They can be purchased on their company website but it doesn't appear that they have one that fits an ER11 collet. They're mainly 1/2" and up.
Lifting is all a function of mechanical advantage. Define your lifting mechanism first, then select your motor. Motors themselves don’t have a...
That’s a question best asked of the vendor. I’m seeing variability across that model and it’s all likely based on end user specifications.
I really have no idea. Theoretically it's unlimited as all that matters is the area between the compression wheels but success comes down to how...
Seems about right but you will need to give some thought as to how you’re connecting the rails. Also as the ACRO system was not designed for...
Have you considered two opposing X-axis gantry beams, one for speed and one for strength, one set back parked while the other operates? Belts on...
With the latter though you’ll have substantially more inertial mass to overcome. Granted, it will be divided by two but those halves will likely...
This is a bit of a difficult one to make suggestions on based on the size. You’ll definitely want the X-axis set vertically as the only weight...
Our’s are TR8*8s. But back to the OP’s question. Pitch is the distance between threads. Lead is the distance traveled per turn of the screw. Lead...
The magic of the 1515 is the dual beam X axis so the upgrade is a little more complicated than just extending some members. It’s just best to...
""
Have you considered replacing the bearing?
We really can’t see anything in your video. Please provide close up photos of the cart and your the track where it stops. The most obvious...
Just order a 1500mm length of C-Beam and the gantry carts separately and then combine them. If you feel the need for end plates, they're also...
While it was state of the art 10 years ago, better solutions have come along since. Consider LEAD Lathe | OpenBuilds. It's easily modified if you...
While our first suggestion will always be one of our well designed systems like OpenBuilds LEAD CNC Machine 1515 (60" x 60") I understand your...
