Separate names with a comma.
Some features disabled for guests. Register Today.
Details and Specifications Build name: C-Beam Mini Mite Usable Build Volume: 8.5" x 8.5" x 2.25" (216mm x 216mm x 57mm) based on using 3/4"...
^^^^Other way. Long X, short Y in order to achieve a 48” width infeed.
And remember, bigger is not always better when selecting stepper motors. Size them according to the system you are building. Also 4 Amps or less...
The question I have is how to get the current versions of files posted in 3dWarehouse brought down to where they’ll work in 2017. Any suggestions?
Yes, the bed is over 48” wide. The carriage travel is not quite that though.
You might check with the parts store and ask for a quote on a 1500mm (X) x 750mm (Y) system based on the LEAD 1515. They’re pretty good about such...
Tuning a bent lead screw is actually fairly simple. With the gantry at one end, rotate the screw slowly and flex it against the bend and keep...
In taking another look at revising the system with the new plates, the flanged washers and the axial bearings it looks to be pretty much a wash...
You'll also need the bearings that go with the new plates. Flanged Bearing 688ZZ 8x16x5 (openbuildspartstore.com)
Why not just drill new mounting holes in your existing plate?
Powering the bottom rail is definitely the way to go. It results in greater lateral stiffness making for a cleaner cut.
Nice build. Any chance you could offer more details? Thanks.
What power supply are you using?
^^^everything he said except the clone part. Real Arduinos are cheap enough to not even mess with clones.
Then it’s probably best to ask the person who created that specific version rather than throwing it out in the open forum. He may not be checking...
Just be advised that off brand extrusion may not have the same tolerances. BTW, what is that you’re showing in the photo?
The parts store is generally very responsive. Please check your spam folder as the response may have wound up there.
The RoutER11 fits the bases made for the Makita RT0701C and XTR01Z series routers for when you're wanting to do handheld or table mounted routing....
You sure get points for originality with this one. Just guessing but I’d say you’ve got an uphill/downhill issue due to too much flex in your...
If you're trying to go cheap you might consider more of a free arm build Simple Cnc System (arduino Grbl) | OpenBuilds David Bunch gives credence...
