Separate names with a comma.
Some features disabled for guests. Register Today.
There’s generally not much call for having the shaft centered that far off the extrusion. If you look through the standard ACTUATOR | OpenBuilds...
The key to aluminum is always clamp it down. I got careless cutting 2x2x1/8 angle and shattered the fence on a 10” cast iron miter saw. It’s such...
I’d check the App Store. There’s got to be an app for that. (You’re not alone though, I do the same thing.)
I can’t answer most of your questions but the answer to 2 or 4 rails is 4. This prevents rolling of the C-beam channel subsequently preventing...
They probably do but I have no idea where. That's not my area (I do physical build questions). Posing the question in the open forum would give...
Sorry, I thought you were talking L type angle brackets. Yes BACCs are a good solution but still the possibility of lifting the front edge....
You still risk slight rolling of the 20x20 when pressure is applied with the brackets located on the back side like that. I would suggest using a...
If you're looking to beef up a minimill for harder alloys this is pretty much the ultimate guide: OpenBuilds MiniMill Review (mostly for cutting...
The real question here is what size plates are you looking to make?
But are they really? Blending the Y and Z signals and potentially inducing backfeed into the Y channel? If I was looking to create a clone signal...
The narrow spacing/small bolt pattern on the wheels will lead to undesirable flexure. Go with something more substantial.
I'm not aware of anyone specifically making them for CNC as there are so many different variations. You'll just need to find the load that needs...
Always a good idea to check your spam folder. A number of users have found this to be the issue when they haven’t received a reply.
You will want to install constant force springs on the vertical axis to counteract against gravity,
It's a fully modular system. Just replace the shorter sticks with longer sticks. Ooznest will cut any length you need.
Lasers and clear acrylic are generally not a good match. The beam goes right through without cutting. It can be done but as I said, not a good match.
I hadn't seen the xyz carve before but as it is nothing more than an X-Carve knockoff it becomes fairly easy to compare to the Ooznest Workbee....
Hypnotizing the cat?
Yes, it's an Ox. Please post a photo of the controller. Also where are your limit switches located?
Be patient, help will come. I don’t have the answer but sooner or later someone with the answer will chime in.
