Separate names with a comma.
Some features disabled for guests. Register Today.
So played with the belt tension and whell tightnes, and it's getting better. tightened belt, is alot tighter now and that seems good. tried...
Thank you for the suggestions, I'll play with it tonight when i get back home from work:)
I'm not in front of it right now but did measure it earlier and believe its right. I'm starting to think it is deflection mostly causing this....
i think there is a compination of backlash and deflection going on here. i just redid my my step settings measuring off the gantry with my dial...
played with the backlash settings and that helped, measured the backlash With a dial indicator and got to 0.45 for correction. but now i get a...
could it be that i need to enter some backlash settings in mach?
if i try the set steps per unit wizard and ask for 100mm i the lengtht is correct in both x and y. I tried to make a 50x50mm Pocket With the mach...
yes grub screws for the pulleys are checked is checked, tight as can be.
So i finally got around to get my ooznest ox working, but i have a slight problem in getting it dialed in... I'm trying to cut a test circle of...
I'm going to use autodesk fusion 360, It's free for hobby use. It's available for mac also.
Hi , i think you will find some of your answers by searching in this forum. I don't have any experience myself as i'm still building my machine,...
First a little about my cnc experience which equals none. This includes experience with cad/cam software as well. So I will be learning as I go...
Nice build and great videos, May i ask what you use for electronics and sensors?
Can any one tell me where would be the best place to mount the steper drivers. 1. Close to the motor 2. Close to the controller 3. Doesn't matter
Thanx, think all three are good options. Need to sleep on it i think.
Having a difficult time choosing what controller to choose, Think i will use ethernet smoothstepper, but what to connect it to... I have found...
Ok, think this spindle and vfd combo eill do it....
Hei, Ja, er fra asker.
jajohnsen published a new build: This build is based of Ooznest 's OX CNC Mechanical kit (500x750) with a few mods if all goes as planned. Read...
there are two 1.5kw versions one with a diamater og 65mm and 2.6kg and one 80mm diamater that weights 4kg. the 0.8kw is 65mm and 2.8kg
