Separate names with a comma.
Some features disabled for guests. Register Today.
Just https://docs.openbuilds.com/doku.php?id=docs:interface:wifi-setup-nextgen (make sure your CONTROL is up to date - should be on V1.0.388) and...
Include serial log, but possibly set up Custom Probe under Probe type, but entered invalid numbers for offsets in the Gear icon popup?
Use the Troubleshooting tab to test Activate probes by hand watching the Probe pin status on Troubleshooting tab
doesn't loading up http://ip-of-the-computer:3000 in a browser work? Ipad (even mini) should have enough resolution: In vertical cuts off the...
No, never bothered. USB up to 3ft, anything over get risky. Better ways to do it than a long cable
Try first Still most of them just makes the USB cable longer. But your call to play with it after all (: Otherwise: Interface? [MEDIA]
Sounds like it might cause EMI problems (those cheap adapters are just extending the wires) Why not use Wifi: docs:blackbox-x32:wifi_setup...
See 2nd half of docs:blackbox-x32:currentadjustment [OpenBuilds Documentation]
https://github.com/OpenBuilds/OpenBuilds-CAM/issues/65 was a bug a while back, so if it came back thanks for the report, will reopen
Awesome, please post a write up Getting started with Javascript Macros in CONTROL / Library of Macros created by the community with screenshots...
Don't know Python/pyserial enough to help with your code, but compare against a known good Python sending script like...
Please use our recommended relay: docs:blackbox-x32:connect-dewalt-iotrelay [OpenBuilds Documentation] - safe mains isolation of mains voltages...
You should be able to yes,those statusses are available in that laststatus global object inside CONTROL (look at laststatus.comms.runStatus)...
Not at this time, keep a conversion chart at hand, you'll get the hang of it in no time (: Not that I know of G38.2 Z-30 F500; Perform touch...
They don't always place as nice with the X32 as the newer Interfaces, so heads up if you encounter issues Pinout of X32: >...
What controller is on the machine? (OpenBuilds BlackBox?) What software are you using (For CAM and for Host?)
Great, so you can still consider one that can work with a single solenoid :) As support mentioned to you as well, there is only one output...
Not in a bad way. Will make it take proper effect Should only be relevant to soft limits
Is your $376 set correctly? (Should be $376=1)
You can "IF" the module has an optocoupler or other form of drive circuitry. Its only a logic signal (can't drive relay coil directly)
