Separate names with a comma.
Some features disabled for guests. Register Today.
I don't think it will be possible, not with aluminum framed machines, what you want is a proper milling machine.. steel uses low speed cutters and...
Free the cat.. we wanna know :) How well would the nylon stand up vs delrin...
So.. came across this... I like the idea.. not so much the implementation.. it slides into the channels of the AL extrusions.. But it's made...
Home depot has shielded 4 wire alarm cable in 22 and 18 awg, it's like 50 or 60c a foot.
I like openbuilds.. but I don't think the mini mill is worth it. If you order a complete setup (steppers, controler, etc etc), you are looking at...
I don't think you can use the Blackbox with external drivers.
Nice choice in steppers, pricey.. probably overkill, but good choice :)
Yes, it's your best resource. It is run by Bart (the guy who created the 6 pack) and some of the other grbl_esp32 developers. Best place for help.
Are you on the discord channel? It all depends on the PSU you are using. Some can be connected in series.. some cannot without modification. I...
Adding some pics. this is my temp mount till I get a box to put everything in. [ATTACH] [ATTACH]
No, he Blackbox won't run 48v. None of the controllers will run 48V, it's the external drivers. Mine run from 36 to 90v. I also have the 6...
This is not for the feint of hart, and you are dealing with high currents, and potentially high voltages. If you don't know what you are doing,...
I'm currently using the 6-pack I posted about a while ago. I originally had TMC5160 drivers, but there is an issue with those, I tried the 2130s,...
post a link to the steppers you have, it will be easier to figure out rather than the back and forth. I have 8 wire motors. They are both uni...
You make sure you build extraction into the case..
which bob are you using
Now if only you had them in stock....
You will have to use CNCjs or another GRBL sender. The OB software looks for a specific identifier within the $i command. The XPro v5 does not...
Yes, you will have to go aftermarket. Either rack and pinion (best option), or belt driven. See the builds here, there are a few 4x8 custom...
Yes, it will.. you have a slightly sagging screw.. add rotational motion.. it's going to cause vibrations and will affect accuracy.. you will...
