Separate names with a comma.
Some features disabled for guests. Register Today.
It may not appear to you that it's true but you'll achieve much better results if you put the printer on a solid surface and not on two surfaces...
Did you try to contact OpenBuilds store and ask them? I'm sure they'll accommodate you.
I use linear rails AND ballscrews. Nothing wrong with the ballscrews. It's the wheel that some people object too.
I think David meant the .nc file and the gcode file and not three version of the same nc file.
If you are in North America, where we have a 110v/220v system you can do it. Connect the supply wires just like you would if it were 110v. Just...
It would be good to know what material you are planning to mill in since wood may require different settings than aluminum.
The problem he's having is not the 'keep tool down' it's the M3 and M5 command that shut the router off while going up and down between letter,...
It's a NO proximity switch.
As you've mentioned in the past, there are two kinds of E-Stop. One that shuts down everything, preventing just what you've said above, and one...
Yeah, my bad, I forgot that the setup is saved on the chip and not in Control. In IOSender it must be default and that's why I had the limit...
I was away over the weekend and when I came back today I powered the machine up. I checked the version of Control and it's 1.0.370 and this time...
I didn't master the art of compiling the GRBLHal, unfortunately. I wish I would, though! :(
I have a Teensy 4.1 with GRBLHal. Control doesn't recognize the Teensy. Is there a setting to get Control to connect to it and if not, can this be...
@Dancook, you know you can hook both drivers to the same pull and direction pins/connector? It works and has been done many times before. Not the...
Neil, if you have SketchUp you can find them here.
LOL, now that I saw this I realized I have 7 limit switches on my CNC router and 3 on each of my 3d printers that act as the stop for the axies!...
Brian, I think you could run the machine at a little higher in/min. Looks quite slow to me.
For the Z locking I would suggest using a 3/8", or 1/2" if you want, threaded rod with a coupling nuts and a regular nut. The coupling nut will be...
There is an easier way to do it but it may take a bit longer to do. First, use a probe to find your X and Y zero points. Use this to start ALL...
LOL, yeah, I had to do that.
