Separate names with a comma.
Some features disabled for guests. Register Today.
I am looking for an easy way to go through all of my GCode files and see what they actually look like. I want to manage my library a little so...
The CNC is an OmniCAM, really well designed machine mechanically. Only interface at this stage is a handheld unit. Not sure if the processing of...
I am trying to help a friend with his CNC machine, it has the following control shown in the picture. I would like to find out what it could be...
Thanks for your help. It obviously can't be done then as there is only one output from GRBL. I might look at what I can create with a push button...
I am not understanding that part of the documentation. It looks like I do have the 3 pins above my power for gnd, 5V and sig. Documentation looks...
Out of all the photos I have on my phone this is the only one that shows that part of it and I am not sure if that’s the servo part in the corner...
[ATTACH] I think this is the one I have. I don’t think I have ever seen that other one for sale here in Australia.
Oh sorry I see now. If I hook my 24V power supply in line with it it would switch that power. I already have my coolant port turning on and off...
Doesn’t it output 24V?
Setting up a pen mount and solenoid to “engage” the drawing mechanism. On the OpenBuilds Blackbox I intend to use the external plug for the 24v...
Here is my input on normally opened vs normally closed. If you have physical access to all areas of your machine and enough cable to reach all of...
Also it’s non symmetrical but still completes the contour. The 3 small slots on the cut out I was using all have the exact same dinky part even...
This machine has been running pretty much non stop for months. The chain is fixed to the moving axis and is twice the length of the axis so the...
It happens with the drive system completely disengaged. The motors are still making unexpected movements. Just computer, blackbox, motors...
Thanks again man, I will test it all out and see if it persists after flashing. There really seems to be a bug in the system and I just got asked...
If you draw a line down the middle of that cut is it symmetrical on both sides? Not 100% sure but I think maybe the photo is just hard to see if...
I just woke up and it occurred to me, if it was something mechanical causing my problem the slot wouldn’t know where to complete and the hole for...
That is **** cool! I live about a 30 second walk from the rainforest so I don’t need monitors for temp and humidity. It’s always hot and always...
Also an off topic bone to pick with you two.. you said having an Arduino with GRBL was a good way to test interacting with OpenBuilds Control. It...
The machine goes up to about 16000 before it go brrrrrr and stops when I have tried to push it for curiosity. I usually just set it to 8000 to get...
