Separate names with a comma.
Some features disabled for guests. Register Today.
Normally I do spiral in, I think I just forgot on this run. The bit is actually an 8mm bit on that job, just selected the generic bit as it...
Here are my GRBL Settings from OpenBuilds Control if that helps. $0=10 ; Step pulse time, microseconds $1=255 ; Step idle delay, milliseconds...
Forgot to mention, the full gcode file will move to like X50 Y50 after it does the initial screw down holes. I then go to OpenBuilds Control and...
2 GCode files there. One is the full with the predrilled holes and stuff. The 2nd file I just cut operation 1 and 2 out while still leaving the...
Machine slowed down and specifically made the moves so it’s not like it grabbed. Running the job in the air does the same things.
Anticlockwise
It’s just weird that this is showing up now. I redid the post process (OpenBuilds GRBL for Fusion 360) to make sure there wasn’t a problem with...
I have had it all checked out. Setting it off a longer piece seems to have given me back more accuracy in the measurements. Getting some really...
I have just cut a 2200mm to test the X and 1000mm on the Y then measured and adjusted from there. Might still be problems with the machine but I...
It's all super rigid chain driven with almost no slack or backlash at all. I have adjusted chain tension and still getting the same result, which...
Have also confirmed it with 2 individual different branded digital measures with exact same results.
This is also happening on the X axis, just checked
I have had an issue with the Y axis getting locked up. Increased the VRef on the OpenBuilds Blackbox. It seems ro have smoothed things out....
I checked this after your reply and it’s all the same but I think it’s a mechanical issue now. Thanks for your help.
Had an issue today where the first 2 operations (from Fusion 360) worked fine but the 3rd (outline cuts) were massively offset on the Y axis...
Trying to interface with OpenBuilds control but the machine I have my Blackbox connected to is in a remote office. Maybe if I issue the $C command...
Is there a way to emulate a Blackbox and connect it to the OpenBuild Control software?
What you said sounds very reasonable, the workshop owner (family member) doesn’t follow any instructions at all. I will just have to check every...
Weird, I don’t remember changing that but it worked. Is there an easy way to hide the laser options (or any option I don’t want someone else...
I have configured Fusion to have a work position at the top of my wasteboard with the paper trick to find my Z zero. I had to put a 1 in the WSC...
