Separate names with a comma.
Some features disabled for guests. Register Today.
Finish
Thank You both for response. So, before to ask about how people do double side milling, I of course had some practice. Unfortunately, this...
Thank You one more times. Should be rather creative process to implement double sided milling, I meant this little device cross laser [ATTACH]...
Thank You Jonathon. May be at this moment (2) is really more easy to implement. Just do not like "visually lined" . Do You think that I can...
So, the question is about how people solve the problem, when they find , that there was some other tool path to be passed, but.... they just...
I use Aspire. I can do that, to leave some material for final cut, change an end mill for 3 or 4 flute one and make final profile or pocket cut...
Thank You all for Your replies. I clearly understand, that the C beam machine in comparison with some professional big milling machines is like a...
Kevon, You speak about pictures, but I can not see any picture in Your post As for lubricant I also use Cutting fluid and also remove chips with...
I will appreciate any machinist , who will say, that I would not expect clean and shine cut of aluminum using cnc routers like C beam. At least I...
Hi Kevon, My settings on C beam was as follows RPM 13000 DOC 0.38 mm feed rate about 700 mm/ min 3mm O-Flute by Amana tools Plange rate: 70 mm/min...
The question is about cutting aluminium. I was already trying different aluminium (6061, extruded) different end mills ( some expensive 1 flute...
Thanks a lot for in detail explanation. I will try today this feed rate. You mean 13 000 RPM, not 1300 , do You?
WOW!!! Sure? 1100 mm/min !! It means 4 times more speed then I run (254 mm/min) Please Please confirm feed rate for cast aluminium MIC-6 plate :)...
Thank You, Darathy. The question about how to improve cutting surface quality (which bits, which aluminum, speeds and feerdates and etc) still...
So, here is my first cut of 1/4" cast aluminum MIC 6 [ATTACH] I used 1/8" spiral "O" Flute bit (Shaft 1/4") from Toolstoday.com Feedrate was 10...
Yes, exactly 60 for 3 plates, so 1 plate is USD 20. In my area :) My area, Bob , is Georgia. Not US state, but Georgia Caucasus. Too difficult to...
Expensive?!?! :) It depends. How about this Openbuilds Kyo Sphinx C-Beam CNC Router Plates Stainless Steel Extra LARGE | eBay It is exactly...
