Separate names with a comma.
Some features disabled for guests. Register Today.
A lot of tool manufactures also provide some info on feeds and speeds to put you in a ballpark. The material also will have a recommended cutting...
I say 10 because I'm assuming that the socket components might not be rated to handle more than that. However, after some googling it seems the...
The power socket is rated 10 amps. So a 10 amp fuse. Did you tear apart that DC transformer? Plug the fan in. If it rotates the wrong way then...
What is your question Rahul?
That'll definitely work. I did something similar in my control cab to power my smoother stepper. Just tie that in with your AC power.
I'm not sure if that'll work or if current will rush in and damage it.
OX plates? Check the first post at the top of this thread. openbuilds.com/threads/openbuilds-ox-cnc-machine.134/
You should be able to find a fan in other DC voltages.
The board should be isolated from AC. Four plastic standoffs is good. On another note. Motor cables can get a shield too. Limits tend to get a...
Use a 3 or 4 pin and tie them to the AC power in gound. Carry the ground in from the AC power and ground the case too. Might have to scrape a...
Set them to 3 and keep and eye on temperature. If any are getting too hot to touch then turn the driver down for that motor.
The reason they are connecting it to "ground" is because they're using an arduino. It's not the same as AC earth ground. It's basically DC...
Nope, but I'm not an electrician either. I do not have zero experience though. Just enough to keep the blue smoke in and my hair in place....
I was going to mention running an exterior driver off the xpro. I didn't know if folks have them working with external drivers though. Use a 48v...
Looks good to me. What spindle are you planning on using?
Try fixing usb on V1 or maybe the cable and the V1 port aren't getting along. Try another cable. You could pick up a cheap driver and PS package...
It sounds intermittent though. Guess it could be a driver on the v2 board. So yeah, maybe swap steppers too. First I thought about counter...
There are AC and DC spindle motors. DC spindles(google quietcut spindle) are easy to hook up and run. They are powered by a DC power supply, are...
Is your Z axis binding? Might just need some lube and a quick adjustment.
High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit, DC Servo Motor, DC Servo Motor kit, Stepper Motor Power Supply, CNC Router,...
