Separate names with a comma.
Some features disabled for guests. Register Today.
Did it solve your problem?
I have a .8kw watercooled and its hard to tell its running when it's not cutting. It's a very quiet spindle. I can talk on the phone right next...
:jawdrop:
It's not a very rigid material, but I think this is going to work well for what you intend to do Charlie. Keep us updated. Joe
Not saying it'll help, but what are your other specs? Step settings, power supply, software, material, etc. Have you checked all things mechanical...
So this is about a moving Z platform vs a moving Z slide?
So fixed gantry vs. fixed bed? They both have the same problem of clearing the bottom of the Z slide.
I'm confused.
Hi Paul, It sounds like you'll need a separate power supply and a relay for the spindle. The arduino will switch the relay with low voltage to...
6337 solder makes life a lot easier over 6040 solder.
Hi Colm, Welcome to the forum. Many members here are using sketchup with the sketchucam add-on or fusion 360. You should try both. They're both...
I wouldn't say it's dangerous if everything is secured. It's certainly not desirable, but a little whip from time to time isn't a big issue. If...
Oh boy Julius. :confused: That's too much to cover for one night. In lite form; a 2005 screw is the harder of the two to turn and 16mm screws...
It'll probably work. 2505 is definitly overkill imo. If swapping your design over and waiting for new screws to arrive is not a problem maybe go...
The drivers I recommended are more than enough to drive those 2.8a motors and are $23 less. Unless you want to build another machine with nema...
I like those drivers. They're a bit extreme though. What about these instead High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit,...
That's interesting. So you put a blade fuse inline. Did it blow the fuse? It's hard to tell from the 1st image. I'm guessing it did(I wouldn't...
Did you check the fuse?
Oh boy. Do you have anything else on that circuit that you're having problems with or was it just the outlet?
So, You turn the board on, it flashes, then it shuts off after the motors get power? Which Xpro version do you have? Did you kill power when the...
