Separate names with a comma.
Some features disabled for guests. Register Today.
It's hard to say. It's possible your speeds and feeds were too high and the bit grabbed the material pulling the z out of step. It's also possible...
The dq542mas would like the 36v(and 48v).
Cad software to design part. Cam software to generate toolpath gcode to cut part. Or CAD/CAM software to do both. Control software to feed the...
I believe your question is; Is there a way to generate gcode from your line drawings without having to model them first. One route that may work...
I'm lmao. Okay CNCMD. Get that spindle wired correctly and let me know how it cuts in the other direction. Still lmao. No offence. I'm really...
Thank you Phill for taking the time to clarify on this for the other Phil. Yes the 17 and 23 motors do have overlap. As known the numbers are...
So you have been cutting with the bit in reverse.....? How are you measuring this? How much more did you have to cut? Aside from other things,...
Okay. Just making sure you weren't planning an OX or similar. Carry on. :)
I just Google image searched MGN 15 and there was a drawing of the components. You could take Flo's suggestion and use a stiff backer. Maybe some...
Some controllers will allow you to adjust the tool offset for the diameter/rad of the tool and do the math to adjust the tool path. I looked...
Bump your offsets at the controller if it supports it.
I recommend against the sleeve bearings. Profile rail is a great choice. The mgn have bottom seals. The wipers should be good enough to push most...
I wouldn't recommend them for this application. I've specd them for a couple of jobs in the past. They work great for things like adjustable...
I wouldn't put those drivers on a nema 23. What are you building?
No problem. Did you get to cutter compensation yet?
Are you using the GRBL post processor in fusion?
Yes. Center of the spindle on 0,0.
Find the sketch or feature that made it that wide Barry! You need to have more confidence in yourself sir. lol
I could tell you how to do this off the top of my head for SW, but not fusion. I'll try though. To move the existing hole pattern you just find...
Does it run into the front hole? It might not like that. Uncheck full length and try a depth to see if this is the case.
