Separate names with a comma.
Some features disabled for guests. Register Today.
You should be able to connect the xpro through usb and use a controller like grblpanel to control it. Then use an output to the uno to open and...
A few ways to do this. One way is to extrude circle. new sketch the hole circle. cut hole using extrude. Then under create select pattern then...
You'll need an adapter like the UC100. If you can afford a smoothstepper I would go that route though. Here's an Openbuilds thread on this...
Hi Cornerspace, You'll have to give it its own 5v from somewhere. You could use a wall transformer, a usb port, or a small 5v supply similar to...
Try this page C-Beam™ Machine - Plate Maker
Have you looked into Artcam? Autodesk ArtCAM; woodworking software for 3D reliefs, decorative woodwork and CNC machining
Connect signal cables from the Bob to both drives.
33lbs. 5oz.
Very different stress strain curves. G10 is brittle aluminum is ductile. The grade aluminum makes a difference too. You can place the same amount...
Hi Tom. Please include the controller and software you are using. Thanks Joe
You can also look up the pulleys belt pitch diameter and take the circumference.
Awesome.
The price of the lesson is wasted if you're hosed because of that. I'm just getting into FPV drone racing. I expected crashes due to operator...
I hope it's something simple. gl
This is also known as Garolite. A member here used to offer OX plate kits a few years back. I bought a set, but sold them. It's very rigid, flat,...
You may want to try the cnczone forums or the artsoft forums. There are plenty more mach3 users there. I use mach3 but don't use an edge finder....
Try another cable.
Mach will not work. You need a GRBL software controller if you're running a GRBL based controller. Try Universal Gcode Sender.
Yes. That size supply or one with more current capacity would work. I think it's marketing. In general, any spindle over .75kw is an AC spindle...
Just to be clear your spindle should have its own dedicated supply.
