Separate names with a comma.
Some features disabled for guests. Register Today.
G-code seems OK, so machine doesn't do what you told it to. Can you jog below Z0? Alex.
Yes, that's how it works - once you set a workplace coordinate system zero the controller remembers where that is relative to the home position....
Dry PTFE or Silicone spray is the lubricant to use on leadscrews. You don't need to use a lot. Also check that you have good connections on your...
All good except for the one in the quote above - that is perfectly correct for most cnc controllers but won't work with the Duet controller and...
Yes, I can, but it's bedtime here in the UK and I'm busy tomorrow. To answer the first question I need to know what version of Ooznest's firmware...
On my phone, so didn't look at the videos yet, but your description sounds very much like a loose/intermittent connection on one wire out of the...
As this is not an Openbuilds machine you will have to give us a bit more info. My research suggests this is from Makerstore and could be either...
I am also not familiar with a V3 workbee - neither Openbuilds nor Ooznest ever sold a V3. I do have the drawings for all the original workbee...
The post processor creates a g-code file from your toolpaths that is compatible with the BlackBox controller. It is not a Vcarve file. To save a...
Search the group (magnifying glass icon top right) for "vinyl cutter" and "drag knife". Alex.
English please. Alex.
See @Peter Van Der Walt's post about grbl settings. Don't use oil on your leadscrews (traps dust) - use a dry silicone or PTFE spray lubricant. Alex.
Grbl always sets a home position. Without running the homing sequence it will set a home position in it's start up position. Link below explains...
Static is another possibility, although more common if you have dust extraction. Good advice in the link @Peter Van Der Walt gave, and definitely...
The Xtension limit switches are definitely a worthwhile investment. If it is emi then identifying the source is a better solution than trying to...
1). not so much a problem with ballscrews, but parts are sometimes stiff when new. 5). if you travel in a circle and don't end up back where you...
Just to add a detail to @Giarc's post - jog as far away from the back, right, up corner of the machine's workspace to find the dimensions of each...
Probing - don't use a bit to probe XY - use an accurately measured rod - actually probe XYZ, switch to the bit then probe Z only. Motors stalling...
Yes - you can still do that.... [ATTACH]
Also, first priority is getting movements in the correct direction. X +ve moves the tool to the right Y +ve moves the tool to the back Z +ve...
