Separate names with a comma.
Some features disabled for guests. Register Today.
Absolutely no drawbacks - many thousands of machines (including cnc routers which experience higher forces than a laser would) built entirely with...
A torsion box top to your bench would be very stable - build it flat in the first place and it should stay flat. [ATTACH] Alex.
Make sure that whichever axis will be vertical is at the bottom end of it's travel before folding the table (so that the gantry doesn't descend...
I'm afraid that you should also check "expensive" end mills - they are manufactured to be within tolerances and you cannot expect them to always...
Looking at your earlier pic of the settings in the post processor you have set the start/end position for Z as 20 - that's 20 mm ABOVE the limit...
Can't play the video. Try a different format. Which direction does the Z axis move in? Have you checked for play in the leadscrew? - if there is...
Did you update the blackbox X32 firmware? docs:blackbox-x32:firmware [OpenBuilds Documentation] Alex.
If it's on a torsion box you should be able to fix the machine down without distorting it. Lots of people have either lowered or even removed the...
Usually your Y motors are at the back, but the other clue is that your on X axis the tool moves to the right (when looking at it from the front)...
In Fusion you set an origin in the Cam setup. I don't think it matters where in the grid in a sketch you place your object. Alex.
You can also achieve some adjustment with the "play" between the screw the wheels are mounted on and the holes in the plate. Loosen the eccentrics...
You are correct - I also live in a 220/240 volt area and I've never found a reasonably priced alternative. Alex.
I don't use the bit to probe X and Y because of that issue. I use an accurately turned brass rod to probe XYZ, then change to the bit and re probe...
Manual control of speed, IOT Switching Relay Power Strip for on/off. Alex.
I'm not sure why a simple design to cut holes would be a problem for a cad program - can you show us a pic of the finished metalwork? Is .ai the...
First principles - the machine control software uses co-ordinates to control movements. It has more than one co-ordinate system (a set of three...
