Separate names with a comma.
Some features disabled for guests. Register Today.
If you are using the Duet controller there's a post processor (tested with the Duet 2) here -...
Ahh, those jumpers - yes you are correct - Ooznest usually send the Duet board with those already installed. The crimps that Ooznest use (they use...
@Grossvatti, you would have been much better advised to follow the instructions from Ooznest on the Ooznest Learning Portal to upgrade your...
Have you checked the wiring and connectors between the power supply and the Duet. If you have 24V at the power supply end and only 2V at the Duet...
Yes, you might have a short circuit so check the wiring (power OFF!) first. If you are sure there is no short turn the current down -...
Do you mean software to control the machine (see @Giarc's answer) or cad/cam software to design things and create the g-code that the Blackbox...
The error message says that you triggered a limit switch, either by running into it or accidentally touching it. Alex.
The wheels on your X gantry are loose - adjust the eccentrics on those. Alex.
Yes, homing sets the back, right, up corner as a reference point for the MACHINE co-ordinate system. Your job runs in a WORKPLACE coordinate...
Please post your grbl settings here so we can have a look at them. Alex.
Absolutely. I cut aluminium and even mild steel with a RoutER11 (RoutER11 CNC Kit) Alex.
G53 (use machine coordinates system) G0 Z-5 Alex. EDIT - should have said that needs to be on one line.
Hot Knife Foam Cutter Acro 1515 with belt and pinion z-axis Blackbox Settings? Alex.
Copper work hardens, but quenching hot copper anneals it. Soft metals can actually be more difficult to cut than harder ones. Let your copper cool...
You can split longer jobs into shorter segments (tape splitting) using the Openbuilds post processor for Fusion. Fusion 360 CAM changes Alex.
G54 is the default on switch on, G55 to G59 you have to specify in your g-code or select in your control programme (eg Openbuilds Control)...
OK, to explain G53 (and G54) - a cnc router has a MACHINE co-ordinate system which is used as a reference (g-code for that co-ordinate system is...
You are correct, - move the jumper to 24 V. sorry about that, memory playing tricks. The sensors Ratrig supply have a VERY short range, so...
Have you used Openbuilds Control troubleshooting tab to check that signals from your sensors are reaching the controller? Check that you have...
Please make a back up of your grbl settings and post them here. And, as @Peter Van Der Walt asked, please clarify which controller you are using....
