Separate names with a comma.
Some features disabled for guests. Register Today.
I use a RoutER11 for everything from soft plastic to mild steel, including quite a lot of work with aluminium. Shifting the extra weight of a...
I haven't found any limitations. You have to download it again every time they bring out a new version because files saved in a new version won't...
@Giarc - if you don't need to see the g-code the trial version of Aspire will open a Vectric file which can sometimes be useful in helping with...
What are your grbl settings, especially $27. This is the pull off distance and it is explained here :- grbl/doc/markdown/settings.md at master ·...
Sorry, should have put "if so" in that last sentence - see Setting up proximity sensors Alex.
Are your microswitches normally closed? Your original post suggests that you had a permanent "triggered" signal from your sensor. Try changing $5...
Wouldn't affect the wcs Z zero - would offset X and Y and stop 0.5 mm before reaching the full Z depth. Alex.
As @Peter Van Der Walt said, wiring on that motor is the first thing I would check. Re V-wheels you have a little adjustment with the play in the...
So, V carve pro V6.5? (Program Updates〡Vectric) That may not help you though as it looks though you will need a grbl post processor - before my...
The Openbuilds post processor is here ;- docs:software:vectric [OpenBuilds Documentation] Alex.
I'm not using my blackbox yet, but I have read that the SD card is not needed for normal operation, and you don't need to connect to the cnc to...
If you bought those switches from Ooznest recently they are almost certainly NC. The grbl settings are saved on your blackbox - you can use...
As @David the swarfer said, that looks like quite noticeable backlash on the Y axis. The first place I would look is the motor couplers - do you...
Can I ask again WHY do you want to upgrade the firmware? Firmware for 4X box Alex.
Why do you want to upgrade the firmware? docs:blackbox-x32:faq-bootloader [OpenBuilds Documentation] Alex.
I am not familiar with your controller, but the symptoms suggest two possibilities - first, one loose connection to your Z stepper motor. Second,...
YES! use this post processor :- docs:software:fusion360 [OpenBuilds Documentation] Alex.
I'm afraid that router will be too fast for drilling with twist drills. As @Misterg said you need a speed of 5K rpm or slower. Alex.
Not a problem, we like the ones that are easy to solve. Alex.
Did you follow the instructions in this post? Is my build orientation correct ? Openbuilds Control does have a tab for grbl settings and you can...
