Separate names with a comma.
Some features disabled for guests. Register Today.
What control software are you using? If you haven't already done so try Openbuilds Control. docs:software:openbuilds-control [OpenBuilds...
See comments earlier in this thread - the demon post processor should work with any grbl based controller. You can wire both Y motors in parallel...
Homing sets a reference point in the MACHINE co-ordinate system - the back, right, up corner is set to the MAXIMUM dimension for each axis and is...
You need the parts store ;- 8mm Metric Acme Lead Screw Alex.
1) See advice from @Peter Van Der Walt above. 2) Use shorter file names 3) Post the g-code that does work 4) Is the Duet giving any other error...
I can see nothing in the g-code that would upset the Duet. Are you getting any error messages when it stops? If so mscreenshot them (show the...
Looks like there is some slack somewhere on the X axis. Check spindle mounts, backlash nuts, lock collars, bearings on leadscrew ends and motor...
Sounds like backlash. If you post a pic of the oval, labelling the X and Y axes we can give you a clue where to look. Something is loose that...
Make sure you have the very latest version of the post processor - Fusion made some changes on the last update which meant the post processor had...
Sadly my fourth axis is only physically installed. Shouldn't be too difficult to modify a Vectric PP for the Duet if the grbl one uses codes the...
Apologies. Post didn't mention plasma. :banghead:
The probe macro is not output in the g-code. Nor is it in Openbuilds Cam. You will find it in Openbuilds Control. You use the probe to set a wcs...
As @Peter Van Der Walt said, just flip your probe plate upside down. What version of Ooznest's firmware are you using? There should be a a probe Z...
You could, but you would need longer extrusions and longer leadscrews. I would recommend working out what the cost of upgrading would be before...
You can thank @David the swarfer for all the work he (and others) have done to create and maintain that post processor, which is one of the most...
Spindle speed is a variable that the post processor will assign to the S command after the M3. If there is no "S" the post processor can't assign...
As @Peter Van Der Walt said plus, if your circles are "pear shaped" that could be caused by tool deflection. What are your speeds, feeds and doc,...
If the spindle is slowing down during a job we need to see your g-code to get an idea of what's happening. Upload a file here. Alex.
You will usually find the specs, including dimensions, on the manufacturer's homepage but I second the recommendation for the RoutER11 CNC Kit...
Some problems have been created by the recent update to Fusion - please make sure that you are using the latest version of the Openbuilds post...
