Separate names with a comma.
Some features disabled for guests. Register Today.
Makerlink should work with 8020 or chinese t-slot. The difference is in the shape of the sides of the slot and a very minor difference in the...
50mm is still too short for 40mm spacers. You've got 51.6mm of stuff to go through and you need enough protruding for a nut to thread on. 55mm...
Well, if you ordered 40mm spacers they will be too short. You need the length of the spacer (40mm), the thickness of the plate (6.6mm) and the...
I forgot about the lock nuts, probably because I have a couple hundred in my parts box. Good catch. Plus the long screws for the motor mounts,...
Tee-nuts and screws to fasten your backing board to the v-slot. And the Makerlink corner connectors are in the store here: Makerlink® Products -...
From my calculations, you'll also need 6 bearings (688Z), 6 lock collars, 3 flex couplings, 3 anti-backlash nut blocks, and about 40 screws 5mm...
Also note that you have to set $2=7 to invert the logic on the X, Y, and Z Pulse ports so that it drops the signal to 0V to send the signal....
I've done 5mm holes with a 1/8" carbide o-flute endmill. Circular CAM, DOC 0.1 mm, Plunge Feed 250mm / min, Linear feed 750mm / min, 15,000 rpm on...
@Grimace Your baud rate is wrong. Standard for GRBL 0.9 and up is 115,200, not 9600.
Those are endcaps. Openbuilds has not released their version of the plates as far as I know, but Ooznest's original Workbee files are here:...
Perfect, thanks so much Gary. My google-fu failed me, I didn't find that chart. That saves me from fishing more wires through my drag chains.
So I'm in the process of getting away from a tinyg board with onboard drivers and switching to an Arduino Nano with external TB6600 drivers. My...
Thanks so much for the detailed response. I'm currently using a tinyg but finding it doesn't have the oomph for the high-torque Longs motors I...
Some great modification ideas shown here! A somewhat related question: What are your customer builds usually using for the control system? xPro...
Just as a follow up, I also tried using CNCjs but I had issues when doing my z-probe. It was not setting the workspace Z zero coordinates...
I don't use Aspire but what you're saying makes sense to me.
Then your bit won't reach the spoilboard either. You need to use a longer bit or drop your bit lower in the collet or raise your spoilboard. I'd...
Can your bit be jogged to reach the spoilboard without the material being there? Edit: Is it the Z travel bottoming out or is your router bit...
The standard Openbuilds lead screw has 4 starts and 2mm pitch. That means it travels 8mm per revolution, or 25 steps per mm with no microstepping.
Well, I did a lot of digging, and just managed to get things going the way I want using Serial Port Json Server and a Android tablet. Assuming you...
