Separate names with a comma.
Some features disabled for guests. Register Today.
How should I create hot pot/pan mats from wood? We had mats made from cork that I cut out on CNC router but I don't know where to buy cork that's...
I don't know why OpenBuilds sell lead screws that are 7.8mm in diameter instead of lead screws that are 8mm. I had to make a tap out of a small...
Did you install the drivers? Reboot your computer.
1. Measure the thickness of the material. 2. Measure the diameter of the bit used for pocket toolpath. 3. Generate the toolpath and preview the...
Here is the transmission at YouMagine – Fully functional gearbox model - ZF4HP22 by Aaron Potschaske – YouMagine The part list doesn't list the...
[IMG] I went to Amazon's Germany site and found some of the parts but I can't find some of the parts on Amazon's USA site.
I found and downloaded the files for a working 3D-printed model of an automatic transmission but the part list is in German only. I tried a...
I wish that OpenBuilds let visitors enable or disable the snowflakes.
Turn everything off and CAREFULLY check the wires.The wires may not be inserted into the screw terminals far enough, the screws may be contacting...
Are there best filament for mechanical parts like gears?
Try making another motor mount and put the mounts at top and bottom of the carriage, holding the motor at top and bottom. I think that the router...
Deep of cut is usually 1/2 the size of bit. Most trim routers can't accept router bits with 1/2" shank. On a scrap piece of plywood, try 1/4" bit...
I think that there was TurboBASIC in 1980s.
I made some test prints and found out that 4800mm/min is fast enough.
I have SainSmart Coreception 3D printer that runs at 3600mm/min. It has CoreXY belt system and box-like frame. Is it possible to make it run faster?
If you have AdBlock Plus, right-click on its icon and go to Extension Options. Enable "Block social media icons tracking" setting. No more jumping...
I squared the frame as best as I can and mounted the frame to the table. I have Spark Concepts xPro V3 using GRBL V1.1. Is it possible to set up...
My SainSmart Coreception 3D printer has two motors and two limit switches for Z-Axis which raises and lowers the build platform. Homing the...
When you home the machine that has limit switches, the Z-Axis moves to the limit switch, touches it, backs off a little bit, and moves slowly to...
Plywood from Home Depot and Lowe's are not as good as plywood from Woodpeckers and Woodcraft.
