Separate names with a comma.
Some features disabled for guests. Register Today.
X moved to the left looking at the machine and the X head position says 10
is it anything to do with me using windows 7?
no error messages
The machine moved slightly, the same as when I click homeall on the machine control
it does what it is meant to x450 y420 z84
having said that all of the head movement buttons are blue so it thinks it is home now, if I move x-10 y-10 z-10 everything moves correctly then I...
no having turned it all off and back on again putting all axis to the limit switches the head position is x550 y520 z94 now
no data changes if I click either button
No worries, I really appreciate all your help, it has been driving me mad :mad::)
I am back and have checked. There are 2 User-Defined Macros , I can not switch to the machine co-ordinates, the blue is on work co-ordinates. For...
Ok I will check, I am out at the moment but will be back soon to check
No I am not sure, how do I check that?
not sure if this will help at all but I am going to go through the process step by step from the start. I have put all axis at the top right hand...
Yes I have updated the firmware to the latest version, still no luck
Morning Alex, Yes it was a typo sorry. When all 3 axis are in the top right hand corner, all 3 limit switches are activated
Thanks for all your help Alex, I hope your right, I was so pleased that I had built the machine and got to the last thing to do and this happens,...
If I jog minus it goes to the left facing the machine (the side the router goes on). The minus for the Y comes towards you facing the machine and...
When we did the jog test to make sure all axis were going in the correct direction, the X axis was going in the wrong direction so it said on the...
Hi Alex, Ok so I have put the machine near to the limit switches and then clicked homeall. No axis moved just made a noise as though it wanted to...
Ok thank you Alex, I will give that a go now and let you know
