Separate names with a comma.
Some features disabled for guests. Register Today.
You have two options, which are both in the post processor settings. Currently you have it set to use G53 at the end of the job and have...
They are working on it: Bug: Probe queue stuck · Issue #277 · OpenBuilds/OpenBuilds-CONTROL
Did you home your machine first? Control doesnt determine where the machine goes. It merely sends commands from your file to the controller. If...
Control doesnt support tool changes at this time. You need to create separate gcode files for each tool.
Are the motors engaging? No idea what controller you have but check $4 in grbl settings. Info from the serial log would help us as well.
By home I'll assume that you mean probe to set zero. Go into the troubleshooting tab and test the probe by touching the magnet to the probe...
That's great. I was thinking about this statement... You need Control to properly deploy an Interface. So are you sure you went through all...
An exact distance doesnt matter. Set 0. Jog to to a spot. Use the dro to see how far the controller thinks it moved. Measure. Do the math for...
This shouldnt worry you. Settings are saved on the blackbox, not the computer nor the interface.
Either connect a laptop and use Control or do it the old tried and true way [MEDIA]
Yes
Dont use the workbee 1510 config. Its a completely different machine (belts not screws). You should learn grbl and about all its settings. Go...
Dont switch the axis direction. There's a setting for homing direction. Set up the Homing Cycle · gnea/grbl Wiki
Its not an openbuilds part. Check the manufacture (kentcnc) website, though highly doubt they make that info available. They probably have one...
That was going to be my suggestion. Glad you figured it out.
Out of curiosity, what does the Z dro read when its done probing?
Ok. That's what I thought. Thank you.
