Separate names with a comma.
Some features disabled for guests. Register Today.
Sounds like HiFi - Guitar amps were my diversion a few years ago :confused:: [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] [IMG] The middle one was...
Jeepers! Does Dr Frankenstein know you have it? :D An impressive collection!
I like the valve (tube) tester on the shelf above :)
Just to clear up one thing: The 'Interface' is not a controller - it is designed so that you can send commands to a controller (e.g. the X32)...
I'm no expert, but I don't think that will work: The VFD needs to 'lock on' to the voltage / current feedback from the motor to determine what the...
Have you got the latest version of the post processor? I seem to recall a similar error message appeared after an update to F360....
If you look at the code, the non-circular part of the cut has ~700 points! It is just overloading the controller. [ATTACH] (From NCViewer) What...
There is a macro for Control that adds that sort of functionality: Getting started with Javascript Macros in CONTROL / Library of Macros created...
Thank you very much, Peter! :) I called it 'shell', but some people call it 'Mother of Pearl' - same thing. Just for posterity, it's worth...
I used a 0.6mm diameter end mill to cut inlay pockets in ebony for a guitar fingerboard. Feed rate was 125mm/min (5" / min) @12000 RPM (the...
True, sorry.
No. The DRO reads WORK coordinates - it can read pretty much anything after homing. If you hover the mouse cursor over the DRO numbers (in...
Just scroll back up a few posts and ***CAREFULLY*** follow the advice of @David the swarfer It's not the software.
Still works for me...? (personal version).
A fairly recent update to Fusion changed a lot of the manufacturing settings, and as a result, some defaults got lost - might be the case here....
IME, the resulting solids are faceted and are an absolute PITA to work with :(
If you have a 3D mode of the machine, it's not too hard to set it up as a F360 simulation model (if nobody else has done it already). I did it for...
My impression is that the machine was being overloaded and skipping steps (so it could end up anywhere!). GCode can work in both incremental and...
In your gcode you have: G28 G91 Z0 I'm assuming that this isn't deliberate (if it is, then you need to set G28 in a safe position) and that...
This looks like a 'feeds and speeds' issue to me, rather than workflow (workflow seems OK?). Is this the machine? Twotrees TTC450 PRO CNC Router...
