Separate names with a comma.
Some features disabled for guests. Register Today.
The full build is described in detail on my website. Note that I have modified the spindle since the header photo was taken - DO NOT buy one of...
Misterg published a new build: I designed and made this from scratch. The frame is welded steel filled with sand, and most of the other parts are...
You can stop F360 using G53 commands by changing the setting in the 'Safe Retracts' option on the Autodesk post processor to 'Clearance height'....
You need a CAM program that takes the STL file and produces the tool paths/gcode to feed to Control. I know that Fusion 360 *can* do it, but I...
They look like the ones sold as TB6600, but aren't the TB6600 chip inside (not necessarily a bad thing). The TB6600 chip is very old and a bit of...
If they’re real TB6600 (using the TB6600 chip) then they're really noisy: [IMG] There are drives that are sold as TB6600, but don't actually...
What stepper drivers did you use? (Some make the motors more noisy than others. IME the ones sold as DIV268 are particularly bad.)
I don’t know the board, but I would expect it to be a dedicated probe input, rather than the limit switch. Isn’t there any documentation for the...
The answer is in the first error message - The program is trying to probe the work, but the probe input is already triggered. You need to connect...
Hi - I've looked at your Fusion file: You have the kerf width of the plasma set at 0.55", but the holes are only 0.39" diameter, so Fusion cannot...
Hi - what's the error message? (What computer & which BlackBox?)
I *believe* that you can use that DXF in Open Builds CAM. (For Fusion CAM, just keep going where you were in the 'Manufacture' space - no need to...
Yes, you are ;) Go back to the design space and expand the tree on the left until you can see the sketch that you used to create the 3D model....
Fusion360 CAM can generate gcode files that can be loaded straight into Control. It's a three stage process: 1) Make a 3D model in the Design...
The motor rating is a maximum - the Black box can supply up to 4A; the motor could accept up to 4.2A, so no problem from that perspective.
Post up a screenshot of the 'Tool', 'Passes' and 'Linking' tabs on the Fusion360 settings for the operation and I'll take a look. (Make sure to...
I believe so - My understanding is that the static tension referred to in the guide is the tension in a single strand of belt. The force on the...
I also suspect that your belts aren't tight enough. Gates give a *minimum* tension figure for GT2 belts to mesh properly: For 9mm wide, 5mm...
I’m away at the moment - I’ll have a look when I get home in a day or so.
Other way around: 4 decimals in inch and 3 in mm (I’m sure you know!)
