Separate names with a comma.
Some features disabled for guests. Register Today.
The macro still needs each tool to have its own program - I don't think there's any way around this at the moment: In CAM, make one programme per...
There's a problem with the code - it has I & J values for G1 commands (I and J are for arcs: G2 & G3 commands). G01 X10.466 Y10.338 X11.1721...
Beware of using G0 unless you *know* that the max rate for the axis ($110 for X axis) is set to a number that works. It is entered in mm/min so...
Split the job into two in CAM - one program to rough out and give you a diameter to measure and a second for finishing that you run after fine...
No, it doesn't - it just changes how fast Lightburn asks the the GRBL controller to move. Given that you've had the same thing at two different...
Because it hasn't been set up correctly?? Does the spindle move away from the front of the machine when you jog Y+? If not, the Y axis is...
Use your indicator to check the running heights of each of your 'cars' - The Chinese MGN12 that I used for the Y axis on my CNC were all different...
I notice that you have flood coolant specified for the toolpath that outputs an M8 command when I post process it using the generic grbl POST....
Beware that most common logic level shifters (this sort of thing) cannot supply enough current to work the opto-isolators in the drive. The drive...
Show the data panel if it isn't already visible (button near green arrow) Then click on 'My editable documents' (Red circle) [ATTACH] Once you...
Can you attach your code so that we can see it? Do you get any error messages? If so, what [exactly] are they? Are you using relative or...
It looks like your spindle is out of tram in the Y direction (at least near the edges). Double check that there is no play in the machine and that...
I don't think that timing will help, because the gcode sender (Control) only issues the movement request which is added to a queue within the GRBL...
Something a bit wrong there - 8000mm/min with an 8mm pitch screw would be 1000 RPM (7200 mm/min would be 900 RPM).
D’oh - yes, of course!
A gcode macro to do that should be straightforward (no need for js). (You can add gcode to a macro button in Control) Assuming that you've got...
One setup, two operations. The first simulates as previously on my F360 (i.e. oddly!), the second simulates as expected (suppress the first...
Does the toolpath simulate correctly on your F360 installation? I didn't change anything in your 'Top Gantry plate v6.f3d' file except the tool...
Out of curiosity, I created a new plasma cutter tool (just copied the Autodesk default plasma cutter) and now the simulation behaves exactly as I...
Yes, I did download the previous F360 files. The tool has a nozzle diameter of 1.377" but a kerf width of 0.06" which actually does the cutting....
