Separate names with a comma.
Some features disabled for guests. Register Today.
I checked the motor coil pairs and the pairs on the y axis were wired incorrectly (I thought I checked it before but clearly I didn't) and so I...
My custom machine is powered by the blackbox X32. I did some major upgrades and re-did all of the wiring. I did an update to the firmware and...
Regarding the y-axis alignment, I meant how can I assure that the left and right risers are an identical distance from y=0 and not slightly skewed...
Can I import my old original blackbox settings into my new X32 blackbox as a setup start point and modify the settings during the initial setup of...
I am in the process of completely rebuilding my 5'x10' CNC machine, It was a belt drive originally, but I have since switched to rack and pinion...
Peter, any comments on the video I uploaded?
Solved the setup problem! Still need help with the bump.
No slipping pulleys, all have been tightened and set screws have loctite. Tension in the belts is good. The gantry is square. There is no...
My y-axis is belt driven, but I catch your drift. I will tinker with it to see if I can fix the problem.
I have attached a video as requested. Over the motor noise you will hear several bumps or click noises - that is where the problem occurs. You...
I have a home built 5' x 10' CNC powered by a black box. When the carriage travels along the y axis I always get a few bumps, always in the same...
Thanks Peter, I have sent a msg to the vendor - awaiting reply. Wiring has been checked. When you send the router on command is that sent over the...
I had the subject inverter installed but it quit for some reason and was replaced with a 3KW inverter VFD. I reprogrammed the new VFD with the...
Thanks Peter, I agree with the marketing aspect of your comment. I have carried out numerous experiments thus far changing all the variables to...
I have a 40W diode with air assist.
I have been doing some experimentation with laser cutting parts from 3 mm baltic birch. What is the general consensus on power, speed, and #...
Does any one have a line on some gcode to help focus a laser by running a series of tests using parallel lines and differing power levels?
I am ready to add a laser head to my openbuild 1510. This is the pinout diagram. Any problem using the balckbox wiring schematic to make the...
I do have a brass rod 6.35mm in diameter that I use for probing. If I understand the process, I enter the 6.35 into the probing wizard and when I...
I have used the subject probe for some time now and I find that the probing process often fails, probably because the conductivity between the...
