Separate names with a comma.
Some features disabled for guests. Register Today.
I tried jumpering from 10V to X1, but no luck. I read the manual through again and also tried to turn off the input from X1, that didn't work...
I love manuals, especially ones that were auto-translated from Chinese! Thanks so much for all your helpful info Peter. I'll dive into this again...
Thanks Peter. the RATTM doesn't have a FOR terminal, so although I understand the idea of jumpering between X1 and another terminal I'm not quite...
PS - Does the Black Box output 5V from the DIR pin when you send the M3 S#### command to turn the tool on? How long does it last?
Those connections you just quoted were on my old USB board: [ATTACH] [ATTACH]
Thanks Peter. I was wondering if I can get rid of the DIR signal, since the tool rotation direction is set in the VFD menu. I did go through...
I made the above connections but the spindle won’t turn on when I send the “Tool On” M3 command from OBC. I do have 0-10v coming out of the Black...
I'm wondering if I can adapt a RATTM MK100 2.2kw 110V VFD that previously worked with Mach3 and a common (but old) USB breakout board to work with...
Thank you for the reply Peter. If I was going to move to OBC software I would probably use my newer PC. So you’re saying I can load a very large...
Hi Everyone - I was hoping I could ask you a question about OB Control. I run a ShopBot PRS Alpha at our local makerspace, and I sometimes do...
Hi guys - I just bought a secondhand CNC machine from an older gentleman in Reno who bought a kit on Ebay, assembled the machine, got it up and...
