Separate names with a comma.
Some features disabled for guests. Register Today.
If it's just a change to the Post-Processor then it will be an easy job to make an equivalent Vcarve grbl Post-Processor. However I think there...
The Vcarve grbl post-processor does not allow multiple tool files. It seems that automatic tool-changing would need to be implemented in the...
Actually, I'm wrong as usual, Vcarve CAN output all tools to a single gcode file. I had overlooked that option, after cutting hundreds of parts:(,...
That makes sense Alex. With Vcarve, each tool has it's own gcode file, which is compulsory. I found this a bit odd when I first used it because...
But I assume you have to tell the Duet interface to zero the Z having touched the workpiece? Geoff
If the Vcarve simulation looks correct, and I'm guessing it looks better than your project does, then that's it, all you have to do is make sure...
So your plastic rings on the shank ensures that they are all set at the same length out of the collet. I've never heard of that one before, I...
Yes, I guess that's the problem then. If you don't set the WCS for each program, then the new tool must be the same length as the previous one,...
Alex, I wondered if Colin may have forgotten to set the Workpiece coordinates on the WorkBee control after changing tool and running the next...
Yes, I don't think I'll add anything more because it may only serve to confuse. I use G92 on my machine which I don't think you do on the WorkBee....
I suppose the 3d could have been cut too deep, but that would only be from too height setting? So I'm guessing that at some stage, one or more of...
Good but for the VCarve, as you say, looks a bit scuffy. You said that you have cut it too deep, I'm thinking that the only way to do that is to...
Well I learnt something on #406, so very happy to have hung in there:)
Yes colour wouldn't be a help and I gather that Stereo Photography may be coming or already there on phones (things that the kids use to...
Perfect Alex, that's a lot lot easier, and on first sight, seems to have made a good enough model. :):) Geoff
Didn't know that Alex, thanks I'll try it Geoff
Yes I agree, Aspire is probably for the serious businesses, who are making their living with this stuff, and should recover their investment...
Bet you'll be after one of those fancy Ooznest Workbee Enclosures next ;)- Geoff
Yes Colin, if you can live with 2ft x 2ft then Vcarve Desktop is probably the way to go for you, which you can upgrade to for about £150 I...
I use 90, 60 and 45deg cutters, from here 45Deg 60Deg V-Groove Router Bit Straight V Type Slotting Cutter | eBay obviously the diameter depends...
