Separate names with a comma.
Some features disabled for guests. Register Today.
Cant figure how you can use the touch plate (NO) with your switches NC...Riley from Synthetos agrees...below is a response to me trying to get the...
Mine is .97, where did you read about .98? Couldnt fnd anything on the Synthetos website...
I have the TinyG controller and one of the chinese solid state relays to trun on/off the spindle...with this setup, sometimes (most times...
I have been using the Makita for about three weeks now...no issues, I like it pretty good...$99 here in the states but WITHOUT the extra bases!
Thanks!
Nice job on the electronics! Where did you get the cabinet and 2 and 4 pin connectors? Thanks Leslie
...many of you may know already, but be aware, if you read about limit switches, the advice is to get normaly closed switches as they are less...
The machine will only stop if the switches are set for Homing + Limits...If set for homing only, loose wire does nothing, until you try to home...
Switches are NC only...joint is good, dropped a cold blob on at the last minute!
Thanks all I ordered two of the relays like pictured...will post some pics when I get things wired...I cant really tell from the picture, do you...
With the TinyG, once you have homed the machine, and set limits to on, I wonder if you can you use a xis min or max switch to be a reliable...
I think I found what you are referring to...this looks like it would work... [ATTACH]
Has anyone used the spindle control on a tinyG to start and stop your router? I am in search of a relay that will switch 120V with the 3.3V output...
When I post my build, I will concentrate on the things I changed...no need to bore people wiht the same things! Anyway, lost my controller...
I am going to drill mine also...it appears that the only flex is coming from movement between the two x rails...bolting them together should...
Trying to look at a "standard" or "normal" TinyG config for an ox type machine...the pastebin link in the video says the page was removed...can...
All three of mine (velocity max) are 5080...dont knwo if that is too high or not!
