Separate names with a comma.
Some features disabled for guests. Register Today.
Hi Peter. Can you reference your 1500mm/8mm + tension set up so I ensure I order the correct parts? Is there a document referencing the correct...
Everything I have is set up for 8mm lead screws so if I could stay with that size it would be much more cost and labor effective. So I might try...
I see in the parts store that you can get a 1540mm acme screw that is 8mm in diameter. I wouldn't have to change any other parts since the one I...
Has anyone extended the Y axis on their 1010? Is it possible to extend and keep the screw driven or would I need to change to linear rails?
Thanks Rob. This makes perfect sense now. I didn't realize that $30 and $31 were like a sliding scale and by changing them your basically either...
Peter, So I was messing with the $30 numbers and a test file I have for different laser power setting (10% - 100%) and the lower I go with the...
I have been playing with the burn rate to achieve the results I'm shooting for but now I'm not sure if I should considering it might effect the...
[IMG]
My control is up to date. I use Vcarve for my CAM. Would S-values be the same as the laser burn rate? I've been talking with someone over there...
I currently have: $30=255 $31=0 I should set $30 back to default of 1000 to achieve the correct %'s? I set it to 255 a while ago. I think I...
Is there a way to adjust the laser power settings from the drop down? When selecting to turn the laser on at 5% its sending M3 S50 and 10% is...
Thank you Christian! I didn't realize that you were setting up the Z zero in vcarve off the spoilboard. This all makes sense now. Thank you to...
I'm following you all the way until setting zero on the spoilboard. So when this is done I'm telling the controller that the spoilboard is now Z...
I use Vcarve and usually set everything on front, left, work piece zero. In the openbuilds control I would zero everything to the same location....
If we were to remove the laser and router from the equation is G54 and G55 still the best way to go? I'm just looking to jog the machine from one...
So its not as simple as it sounds in Christian James's post above? I'm not familiar with how to generate the Gcode a work offset.
If I wanted to create a macro for a CNC router to Laser offset and vise versa what command would I use? If I zeroed my router to X0 and Y0 and...
When you do this and then jog the machine to your X0 Y0 your Z for 1/2" material would read Y.5 correct? If you hit run job wont the Z plunge to...
I went ahead and reverted back to version .202 randomly just to see if hitting "pause" then "stop" would would change the coordinates and it...
Bat....based on what I experienced I don't think you can hit pause and then stop and then hit run and continue where you left off. When I did the...
