Separate names with a comma.
Some features disabled for guests. Register Today.
Also at work. I was thinking if the double wide gantry plate could mount somehow to the cnc4newbies then the double router mount to the...
Wow, that's slick! I've never seen that before. Learn something new everyday! Thanks for sharing that.
Peter, what is the best way of checking that the Z is in tram with X/Y?
The newbies Z attaches with two screws through back of the newbies plate and into the router mount so I cant make adjustments there. My only...
When tramming are you guys loosing up the screws by the yellow arrows or something in the back by the red arrows. I have the cnc4newbies Z so...
What is the idea your shooting for Alex? Is it like a seat for the router that would fit into the router mount?
I would be very interested in hearing your results!
Nope. I didn't change anything and its working great. I have been using the on/off switch on the IOT relay. The switch is located right next...
I think I got some of the last of the older limit switches with the 1010. They only had two pin connectors.
Yes I believe this looks like the same type however they attached it upside down compared to your diagram so the COM is on top and NC on the...
Unfortunately I don't see any printed labels next to the pins on the cnc4newbies z axis limit switch. I tried following the same connection as...
I have black connected on the top and red in the middle.
I became interested in what others here do for long carves after I read a post on Facebook about someone leaving the machine running all night on...
Wondering about long carves. How do you guys and gals handle if something comes up where you have to leave the shop/house and go somewhere or if...
I want to say that happened to me too. The screws bottoming out. I think I just used whatever I had leftover from the Openbuilds Z. Nice idea...
This is ironic........after discussing e-stop yesterday I was in the garage carving a grid in my spoil board when apparently the file I had...
No I didn't take the mounting plate off. I just held the cnc4newbies against the lead mounting plate and used 4 screws to secure. The two 20mm hex...
I was considering getting a big red button e-stop but then I read in a few places, I think once on here somewhere, that the power button on the...
So I have to re run the entire job? I can't start from where the alarm was triggered?
I was running a job when I accidentally hit the x axis limit switch with a cord I was moving. After clearing the alarm I cancelled the job because...
