Separate names with a comma.
Some features disabled for guests. Register Today.
If you are breaking tempered glass, you are doing something horribly wrong.
I'm building something similar and I'll be using a piece of tempered glass. I use one on a printer that has a 400x400mm printer now and it works...
OK, here are the 2 panels. Should work for both front and back. I also added holes for the nut block into the main arm. [ATTACH] [ATTACH]...
I'm designing them now and will try to get them added here in the next day or so.
I'm sorry, I didn't design those pieces. Maybe Gilsegev might still have the ones he made for his version?
So I finally got the CPAP blower working on my printer. Works great! I have the blower set to a very low RPM and it still puts out more air (and...
Here is the video! Works great.. [MEDIA]
Recently, I have been researching how to enclose my printer since I am starting to print more ABS than PLA and wanted to figure out a way to pump...
I'll probably start a new thread about this upgrade but just for posterity sake, I'll add it to the overall build thread as well. I am currently...
Hey Rob, I built a D-bot about 5 years ago and have modified it heavily since then. If you have any questions or want some inspiration on how to...
8mm Leadscrews are only good for 1000mm and one of my axis is 1500. Pretty simple
I just used cable management plastic from Amazon, and the holder was made using tinkercad. The Duet has a nice configuration tool that customizes...
Here's a vid of some rapid printing @ around 130 mm / sec : [MEDIA]
I run a 400x400mm z axis bed (with a thick aluminum plate) and I'm using a single Nema 17 to drive it. The key is 3:1 gear reduction. It not...
you don't need the pi if you have the duet wifi. It comes with a web interface and all the nice upgrades of 32 bit.
I am so happy you were able to reuse the design! I looks great so far. Looking forward to seeing it cut.
I cleaned my x and y linear rails last night. I was amazed how dirty they were, and also noticed some play in 2 of the blocks. I ended up...
That video sure didn't convince me :) looked like he was having a very hard time with it
Update... I LOVE printing on Glass!! Using extra hold aquanet hairspray, and prints stick very well and come off so easily after bed cools down....
Cutting out some railing for my parents house. 13 done and about 70 to go :) I can cut one about every 8 minutes [MEDIA]
