Separate names with a comma.
Some features disabled for guests. Register Today.
Now I just need to figure out how to get prints to stick to my shiny new piece of tempered glass...
Please check out my project here, I started with a D-bot, but it's almost 100% aluminum at this point: Double D-Bot 400mm x 400mm x 600mm
IT WORKS! I'm super satisfied with the movement and stiffness of the linear rail. I do need to move everything down about an inch so I can use...
Ok, got the new piece installed and attached to the linear rail. It's rock solid and moves pretty smoothly. Going to try to get the other side...
Well, this didn't work out as well as I'd hoped. The ABS mount isn't stiff enough (and I think the orientation of the linear rails) , so the bed...
Print one of these out, you won't regret it: Spool Mount by Digger60
Well I took the Cbeam concept a step further and switched to linear rails and designed a 3d printed part that connects it all together. I have...
The 3d printer has a 15x15x17 inch print area. It started out as a d-bot (search thingiverse), but I've changed it so much, it kind of a...
Here is the protoneer, and the drivers are HERE. I have a video of my electronics HERE
Sorry, its 3000/mm per min or 2 inches per sec
Mine have been great. I'm using 350oz nema 23's running at 24v. For a controller, I'm using the protoneer/raspberry pi3 combo. I use my tablet...
The ball screws are pretty beefy and don't whip at all. The original leadscrews whipped around terribly tho.
I used a 120v ac 350mmx350mm silicone heater from amazon. I use a solid state relay to turn it on and off. As for my cnc, I started with a...
Search for d- bot on thingiverse. It has all the instructions. I have changed a few things but nothing major. Its printing well right now....
I have a 2kw spindle that is watercooled, I'm using https://www.amazon.com/gp/product/B01N6N4DDC/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1...
Subscribed.
I used Openbuilds v-wheels on my D-bot for about 2 years until the delrin started to fall apart on my y axis. Switched to linear rails and saw a...
Sorry I'm late to the party, but this looks great! Looking at the picture, I noticed you placed the ballscrew bearing on the outside of the...
Sorry, it's VNC to connect your tablet to the Pi3/Protoneer, not VCNC :)
I use the protoneer Pi3CNC board on my CNC and use BCNC / Raspbian to run it. I have had no problems with it in about 2 years. I use VCNC so I...
